2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2001 Trans not going into any gear

  #1  
Old 03-25-2014, 11:31 AM
Walnutcrazy's Avatar
Walnutcrazy
Walnutcrazy is offline
Registered User
Thread Starter
Join Date: Mar 2014
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default 2001 Trans not going into any gear

Have a 2001 dually with 5.9L 24 valve and a 47re trans with suncoast valvebody. Trans internittently will not engage into any gear. Have drained fluid and removed filter, do not see any obvious problems. When it does go into gear it upshifts and downshifts fine. Only after moving the shifter does it act up and then only sometimes. Does not matter if it is cold or hot. Any help.....
 
  #2  
Old 03-25-2014, 12:45 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,659
Likes: 0
Received 3,168 Likes on 2,922 Posts
Default

How many miles on the truck? Is the linkage in good shape?

Requested this to be moved to second gen ram tech.
 
  #3  
Old 03-25-2014, 01:20 PM
dirtydog's Avatar
dirtydog
dirtydog is offline
Moderate User
Dodge Forum Moderator
Join Date: Oct 2008
Location: Albany, NY
Posts: 17,003
Likes: 0
Received 18 Likes on 9 Posts
Default

You prob have a clogged filter which is not something you are able to see.
 
  #4  
Old 03-25-2014, 01:23 PM
Walnutcrazy's Avatar
Walnutcrazy
Walnutcrazy is offline
Registered User
Thread Starter
Join Date: Mar 2014
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default 01 shifting problems

The truck has 92K and the linkage is relatively new since this truck was converted from a manual to an automatic and had a Lokar brand floor shifter
 
  #5  
Old 03-25-2014, 01:25 PM
Walnutcrazy's Avatar
Walnutcrazy
Walnutcrazy is offline
Registered User
Thread Starter
Join Date: Mar 2014
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default 01 shifting problems

I would think if the filter was bad it would not be an intermittent problem?
 
  #6  
Old 03-25-2014, 02:46 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,659
Likes: 0
Received 3,168 Likes on 2,922 Posts
Default

Is it wired in? Have the correct computer?
 
  #7  
Old 03-25-2014, 11:32 PM
master tech's Avatar
master tech
master tech is offline
Site Moderator & Tech
Dodge Forum Moderator
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Received 92 Likes on 78 Posts
Default

If you can make it happen by moving the shifter, Then I would start looking at the linkage or bushings.
 
  #8  
Old 03-26-2014, 08:01 PM
topkin's Avatar
topkin
topkin is offline
Veteran
Join Date: Oct 2013
Location: Colorado Rockey Mtns
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default

No noise or anything? Sounds like what happend to me... Different truck but, Overdrive unit could be out.
 
  #9  
Old 03-27-2014, 09:38 AM
Walnutcrazy's Avatar
Walnutcrazy
Walnutcrazy is offline
Registered User
Thread Starter
Join Date: Mar 2014
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Trans shifting Problem

I have changed the fluid and filter and now the trans will not engage at all. Usually if I allowed this to sit and try again sometime later it would engage, but now nothing. This is connected to a PCS controller and I cannot seem to find a wiring issue.
 
  #10  
Old 03-27-2014, 09:39 AM
Walnutcrazy's Avatar
Walnutcrazy
Walnutcrazy is offline
Registered User
Thread Starter
Join Date: Mar 2014
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

I do not see anything wrong with any of the linkage....
 

Thread Tools
Search this Thread
Quick Reply: 2001 Trans not going into any gear



All times are GMT -4. The time now is 02:46 AM.