When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
So my service manual and royal purple said my diffs take 2.45 qts. i got to about 2.10 and it started coming out the fill hole. whats the deal? i dont want to over fill and right now it is literally at its max, right level with the base of the fill hole
so if it is sitting level and not coming out the fill hole its ok? or should i suck some out? so i was adding the .45 when it started coming out of the fill hole so it stopped leaking right when it got just a hair below the hole obviously. that too much in there?
Drive is a LITTLE BIT, then recheck the fluid. Sometimes it takes a bit for it all to go where it wants. Driving it with low fluid gets expensive quick.