When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I bought a 3" spacer kit needles to say got a good deal anyways I was told that I would need either a relocation kit or a new track bar anyone had this problem or know if I could get away with stock
You can get away with stock, but, it will probably need to be replaced more often. (depending on your driving style.) When the time comes, UPGRADE!!! Go with one of the third-gen style adjustable fellers, and you will be all set.
You can get away with stock, but, it will probably need to be replaced more often. (depending on your driving style.) When the time comes, UPGRADE!!! Go with one of the third-gen style adjustable fellers, and you will be all set.
+1 to this. Whenever your current wears out just replace with a nice adjustable.
@3" lift the track bar needs to be 1/2-3/4 longer than the stock bar to keep the diff centered under the truck chassis. There was one bracket offered for the diff end over on TGC but I have not looked for a year or two so might not be listed anymore.
12-22-2014, 04:20 PM
