When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Hey guys in just recently bought me a 95 dodge ram 1500, 5.9mag, in had two questions what's the best set of mufflers for a mean growl, the louder the better, 2cd I'm installing a 2in level kit do you think I could fit 285s?
Welcome! Catch up on the maintenance before spending on mods.
Will do thanks for the welcome committee, lol, but the person I'm buying from keep it up pretty decent consider the fact he was 79 years old truck drivers never die, it needs some body works first buy I'm already making that list for the mods
never trust the older owner......when I bought mine the guy said he kept up on everything with it, it still had the original plugs, wires, cap and rotor on it, the radiator was leaking, and the trans went out less than 2 months later, transfer case chain was stretched and forks were bad, and the exhaust was messed up. Like the others said, do your maintenance lol
Hey guys in just recently bought me a 95 dodge ram 1500, 5.9mag, in had two questions what's the best set of mufflers for a mean growl, the louder the better, 2cd I'm installing a 2in level kit do you think I could fit 285s?
Is your truck a 4x4? Im running 285s on stock 16" wheels. Its a 4x4 and has the factory lift. no problems.
never trust the older owner......when I bought mine the guy said he kept up on everything with it, it still had the original plugs, wires, cap and rotor on it, the radiator was leaking, and the trans went out less than 2 months later, transfer case chain was stretched and forks were bad, and the exhaust was messed up. Like the others said, do your maintenance lol
Update :
Well there was a oil leak into the intake manifold, and she was pulling hard to the right, thought it might have been tie rod, but it was the top and lower ball joint ,the thermostat was awful, ...but other than that all good