crank no start
#1
crank no start
2000 ram 1500 with 5.9. Have a problem that I am stuck on. Truck has spark ,noid pulse,fuel pressure at rail is 45. truck starts if I use either but won't stay running . cap rotor wires and plugs are new . Truck has good compression at 140. Any help would greatly be appricated kind of on a tight budget.
#2
Looks like you have ignition, as it's runs with ether. You said you have fuel pressure, but that doesn't mean you have injector pulse. Test for injector pulse, at a few injectors.
If you have no Injector pulse, I would look at the camshalft position sensor, located inside the distributor. That sensor is what controls injector pulse.
If you have no Injector pulse, I would look at the camshalft position sensor, located inside the distributor. That sensor is what controls injector pulse.
#4
Ok. Not sure what was meant by "noid pulse". If everything checks out then, I would scan the computer for codes. You could also try, make sure you take safety to the extreme here, but pull a rail and make sure your injectors are firing. Some freak event could have ruined all the injectors idk. That would be the last to check if I were in the situation lol.
#6
#7
Trending Topics
#8