FIPK No More Picture Tutorial Step By Step: Breather UPDATE! - Page 2

tazman6789 · #11 09-01-2007, 12:17 AM

maybe im just the lazy one and just stuck a breather on the end of the hose instead of prying stuff off. so if i sell the truck just pull breather out pop air box on and done lol.

This ad is not displayed to registered and logged-in members.
Register your free account today and become a member on Dodge Forums!

SmokeGrinder · #12 09-01-2007, 12:20 AM

I still didn't get it off, then again I worked all day and never really gave it a shot....What kind of breather did you put over it?

heybuddy1901 · #13 09-01-2007, 01:09 AM

u have the breather on the left side, i hope mine on the right side doesnt break like that =X

Cereal Killer · #14 09-01-2007, 08:26 PM

I think I'm going to do this...
What is the throttle body spacer for?

steve05ram360 · #15 09-01-2007, 08:44 PM

Great writeup... I added this to the DIY list at the top already.

SmokeGrinder · #16 09-01-2007, 09:48 PM

Thank you very much steve....make sure to check out my updates....

Cereal- I used the throttle body spacers to clear the throttle line and a vacuum line because my element was dipdish and not flat...Also, i dont suggest going bigger than 1/2 " or your going to have trouble with your S-Bolt going in...I tried [:'(]

bigdodgeram · #17 09-20-2007, 09:05 PM

can that be done in california?

WayneC · #18 09-20-2007, 09:30 PM

[sm=forgetit.gif]
[sm=closed.gif] [sm=deadhorse.gif]

Stop! Already!

Racinfan83 · #19 09-21-2007, 03:08 AM

I hate to be a party pooper - but this has all been covered before....
This post is complete with part #s for everything you need to do it without a tb spacer and with a breather that fits in the grommet:
http://www.dodgeforum.com/fb.asp?m=732669

About 20 pages of info on the thread this post came from......

Cereal Killer · #20 09-21-2007, 10:43 AM

This was the topic I used for reference when installing mine. The big pictures are nice