BREAKTHROUGH. The vacuum line on the door I believe is the blend door was to tight, i backed it off just a hair and now the door opens. I also found the switch on top of the receiver drier is bad. Question? are the low pressure and the high pressure switches the same switch, I know there are two switches, but is the switch itself the same? Because I can only find the high pressure switch at the auto parts place.......
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
I don't know for sure if the two switches are the same but I doubt it. If you can't find the low side switch at any auto parts, try an A/C parts distributor. BTW on your first post you stated that at 94* at 750 RPM you had 44 low and 265 high, my chart says you should be at MAX 43 low, 270 high.
__________________ 1997 1500, 318 CID, 4x2 Laramie SLT, Extended cab, Pendaliner SR bed liner, After market fogs in OE slots, Bone stock, Dodge Mud Guards, Custom tool box under hood on pass fender, Laramie Club Member, Black Truck Club Member 111.
I don't know for sure if the two switches are the same but I doubt it. If you can't find the low side switch at any auto parts, try an A/C parts distributor. BTW on your first post you stated that at 94* at 750 RPM you had 44 low and 265 high, my chart says you should be at MAX 43 low, 270 high.
Is it possible that you could make that chart info available?
