When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
My wheel bearing on the passenger side is bad, I have alot of play up and down. My question is do I have to replace the entire hub assembly or can I just replace the bearing in the old one, if so, does anyone have a part number or anything that could help me out? I would highly appreciate it
I ordered from rockauto, I just got the cheapest one they have, it's made by raybestos. I realize it's not the best but I'm in a pinch and it's not worth an extra 60 bucks for a little longer life
I know, but I need the truck to work, so right now I'm just driving it on a bad bearing, I just want to try to prolong the drivers side bearing so it doesn't go on me and cost me more money
I know, but I need the truck to work, so right now I'm just driving it on a bad bearing, I just want to try to prolong the drivers side bearing so it doesn't go on me and cost me more money
I drove around on a bad bearing for who knows how long, only found it during VA Inspection, the wheel had lots of play, looked like slow motion death wobble.
My hub assembly was $120 from AutoZone, and cost $22.50 to have put on, it literally took 20 minutes.