When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4th Gen Ram Tech2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
been looking around for awhile but i can't find any information about the connectors that seem to be in a few places, they have a red slider but i can't tell if you have to push in something after you slide it or they just pull out. anybody up on this? thanks
they should slide away form the sensor or whatever theyre plugged into to unlock and then it should just pull out, might need to use a little pressure on it, at least thats all i needed for the intake temp sensor when i did my CAI
Not exactly. If it's like the plug on the sensor in the intake hose above the engine it is on the same side of the plug as the red slide lock, just further back from the slide tab. If yours doesn't look like that just try squeezing around on the plug (same end with the lock) and you should be able to tell when something moves.