2003 Ram 5.7 Hemi
#1
2003 Ram 5.7 Hemi
Truck has been a menace in the last year!!
Had a misfire problem:
Replaced plugs, wires and coils. Problem was a broken spring (Fixed by my mechanic):Replaced all springs in the bank, checked compression and other vitals.
Accel 457S - Plugs
MSD 32039 - Wires
MSD 82568 - Coils
K&N Air Filter (Put in when we bought it in 06)
Shortly thereafter is threw Cam sensor position error so I replaced the sensor. Not 50 miles later is started stuttering again and threw the following errors:
PO315
PO339
PO300
Just as a note, shortly before the cam sensor error all but the rear passenger side turn signals stopped working. The signal switch has been replaced and been through extensive research and testing to no avail yet.
So, before I take it back to the mechanic, anyone want to throw out some more suggestions?
Had a misfire problem:
Replaced plugs, wires and coils. Problem was a broken spring (Fixed by my mechanic):Replaced all springs in the bank, checked compression and other vitals.
Accel 457S - Plugs
MSD 32039 - Wires
MSD 82568 - Coils
K&N Air Filter (Put in when we bought it in 06)
Shortly thereafter is threw Cam sensor position error so I replaced the sensor. Not 50 miles later is started stuttering again and threw the following errors:
PO315
PO339
PO300
Just as a note, shortly before the cam sensor error all but the rear passenger side turn signals stopped working. The signal switch has been replaced and been through extensive research and testing to no avail yet.
So, before I take it back to the mechanic, anyone want to throw out some more suggestions?
#2
#3