When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I'm in the process of rebuilding my 360. Looking at pistons, I found a set of speed pro flat tops that I want to get. But it doesn't specify if they are for a magnum or an la block. Does it matter? Can you run a piston advertised to be for an la block in a magnum block
Bore and stroke are the same, so, I suspect that the pistons will be interchangeable... Still, I would call whomever you are thinking of ordering from, and verify that.
Yes, they are the same, however, be careful of the compression height. Unless you want to run premium gas, many of the flat top pistons will increase compression. Dished pistons tend to keep compression closer to stock levels.