Leveling Kit Installed!
#33
Any lift will cause more wear on the front end, the higher the leveling kit, the more wear will occur.
#34
Well... more lift than I wanted.
So replaced the struts. Oddly enough the struts alone added a good inch.
I used a billet aluminum puck and had it modified to provide only 1.85" lift, not full 2".
Someone said the that the struts will settle over time. The instructions with the struts said it would sit higher til it settles.
But now the front sits 1" higher than back ( I have helper springs in back).
So ill just put 1" block in back.
I also changed out all but 1ball joint, stabilizers, and a CV axel.
I got a deal on new set of pull offs 265/65-18 Yokohama Geolanders for $300. It looks like I could have gone even larger but o well. Picture is still with old tires on it.
I used a billet aluminum puck and had it modified to provide only 1.85" lift, not full 2".
Someone said the that the struts will settle over time. The instructions with the struts said it would sit higher til it settles.
But now the front sits 1" higher than back ( I have helper springs in back).
So ill just put 1" block in back.
I also changed out all but 1ball joint, stabilizers, and a CV axel.
I got a deal on new set of pull offs 265/65-18 Yokohama Geolanders for $300. It looks like I could have gone even larger but o well. Picture is still with old tires on it.
The following users liked this post:
jkeaton (05-13-2020)
#35
The following 2 users liked this post by Brokenanew:
cheeseburger (05-13-2020),
jkeaton (05-13-2020)
The following users liked this post:
Brokenanew (05-13-2020)
#37
The following 2 users liked this post by cheeseburger:
Brokenanew (05-13-2020),
jkeaton (05-13-2020)
The following users liked this post:
Brokenanew (05-13-2020)
#40
The following users liked this post:
Brokenanew (05-14-2020)