3.7L Exhaust
#1
3.7L Exhaust
Well my muffler is toast. Shop said It also has a crack in the Resonator pipe at the Y Pipe and figure it wont last long once the muffler is replaced because the pressure. they quoted me 480ish to replace it from the Y pipe back (Resonator Straight pipe and Muffler, Saving tail pipe)
I figured thats quite abit since they are also reusing the Tail pipe, and am trying to figure out where the "cat back" exhaust start since we have 2 before the Y pipe. Ive been thinking its from the Y pipe back.
Anyone else replace theirs? how hard is it todo yourself? or would it be best to have a shop install it? if so how much did it cost to have a shop do it.
On a side note, my rear brakes seem to be seizing up. How hard is it to replace them. (It might be my parking brake sticking has it has before but not this bad)
Heard something good here on the MBRP Exhaust, Dont want anything to loud.
*Looking at the MBRP and Magnaflow ones looks like its from the Y pipe back.* Shop quoted me a Walker muffler/Pipe
I figured thats quite abit since they are also reusing the Tail pipe, and am trying to figure out where the "cat back" exhaust start since we have 2 before the Y pipe. Ive been thinking its from the Y pipe back.
Anyone else replace theirs? how hard is it todo yourself? or would it be best to have a shop install it? if so how much did it cost to have a shop do it.
On a side note, my rear brakes seem to be seizing up. How hard is it to replace them. (It might be my parking brake sticking has it has before but not this bad)
Heard something good here on the MBRP Exhaust, Dont want anything to loud.
*Looking at the MBRP and Magnaflow ones looks like its from the Y pipe back.* Shop quoted me a Walker muffler/Pipe
Last edited by Reject; 09-09-2013 at 01:39 AM.
#2
Flowmaster 17458 - Cat-back System - Single Side Exit, 3" Outlet - Force II
Shipped: $458
MBRP S5134AL - Cat Back, Single Side Exit, AL Installer Series Exhaust System (Gas)
Shipped, $422
MBRP S5134409 - Cat Back, Single Side Exit, T409 Stainless Steel XP Series Exhaust System (Gas)
Shipped, $524
Hard finding them online in Canada. I have to deal with ALOT of salt so Stainless might be alot better of a option for me i think. Even with the cost difference.
Shipped: $458
MBRP S5134AL - Cat Back, Single Side Exit, AL Installer Series Exhaust System (Gas)
Shipped, $422
MBRP S5134409 - Cat Back, Single Side Exit, T409 Stainless Steel XP Series Exhaust System (Gas)
Shipped, $524
Hard finding them online in Canada. I have to deal with ALOT of salt so Stainless might be alot better of a option for me i think. Even with the cost difference.
#5
Flowmaster 17458 - Cat-back System - Single Side Exit, 3" Outlet - Force II
Shipped: $458
MBRP S5134AL - Cat Back, Single Side Exit, AL Installer Series Exhaust System (Gas)
Shipped, $422
MBRP S5134409 - Cat Back, Single Side Exit, T409 Stainless Steel XP Series Exhaust System (Gas)
Shipped, $524
Hard finding them online in Canada. I have to deal with ALOT of salt so Stainless might be alot better of a option for me i think. Even with the cost difference.
Shipped: $458
MBRP S5134AL - Cat Back, Single Side Exit, AL Installer Series Exhaust System (Gas)
Shipped, $422
MBRP S5134409 - Cat Back, Single Side Exit, T409 Stainless Steel XP Series Exhaust System (Gas)
Shipped, $524
Hard finding them online in Canada. I have to deal with ALOT of salt so Stainless might be alot better of a option for me i think. Even with the cost difference.
Last edited by lghtngblt02; 09-09-2013 at 03:49 PM.
#6
For my brake issue, wasnt the brakes after all. All 5 lugs on my rear drivers side came so loose i could turn them by hand (when on a jack) and the Passenger side was loose aswell, but not as loose. Only thing I can come up with is someone was messing with my rims. Since I havnt had them off since summer started, and have tightened them afew times since then (wernt loose)
#7
Trending Topics
#8
And maybe you will be without feedback from the O2 sensor (I think there is at least one after the Y-pipe).
#9
Wow, you're almost as geographically transport challenged as I am. I couldn't find any video clips of an MBRP on a 3.7 Dakota. Taking a chance on the Gibson SS single side out especially because got free Amazon shipping deal & crossing fingers they honor it. Woulda' stuck with a custom Borla install but I want to do this myself since on a masochistic streak lately Gimme dat low end burble.
#10
Ordered the MBRP S5134409 -T409 Stainless Steel XP Series Exhaust System
Going to start the removal of my current system now atleast the tail pipe.
Anyone know if I remove it from the Y pipe will it cause a issue untill i get the new system? If I run nothing from the Y pipe back.
Going to start the removal of my current system now atleast the tail pipe.
Anyone know if I remove it from the Y pipe will it cause a issue untill i get the new system? If I run nothing from the Y pipe back.
Last edited by lghtngblt02; 09-11-2013 at 09:28 AM.