New Blacktop Owner, got some questions - DodgeForum.com


3rd Gen Durango 2011 models

New Blacktop Owner, got some questions

Reply
 
 
  #1  
Old 05-01-2013, 03:25 AM
akmerle's Avatar
akmerle
akmerle is offline
Registered User
Thread Starter
 
Join Date: Apr 2013
Location: Wasilla / Kodiak, Alaska
Posts: 11
Default New Blacktop Owner, got some questions

Hey guys, picked up my white blacktop last Tuesday and absolutely love it. Thanks to this site I now convinced I need red caliper covers and the shark fin antenna.

I do have a couple questions for you guys though:
1. When stereo is in Bluetooth mode with my iphone 5, after shutting vehicle off the stereo goes back to satellite radio instead of staying in Bluetooth aux. Is this normal?
2. When unlocking the door by pressing the door handle sensor, is there a way to unlock all doors instead of just the driver?
3. Is there a way to disable the seat belt chime (there are times I don't need my belt, please don't turn this into a seat belt lecture)?

Thanks guys!
Reply With Quote
  #2  
Old 05-01-2013, 08:58 AM
dwolson2
dwolson2 is offline
Professional
 
Join Date: May 2012
Posts: 161
Default

1. Mine stays on the phone. I will sit and chat a few min.
2. It's in your evic settings on the dash.
3.idk
Reply With Quote
  #3  
Old 05-01-2013, 09:00 AM
FSTDANGO3's Avatar
FSTDANGO3
FSTDANGO3 is offline
Champion
 
Join Date: Nov 2006
Location: NORTH JERSEY
Posts: 2,541
Default

I will try and answer:
Hey guys, picked up my white blacktop last Tuesday and absolutely love it. Thanks to this site I now convinced I need red caliper covers and the shark fin antenna.

I do have a couple questions for you guys though:
1. When stereo is in Bluetooth mode with my iphone 5, after shutting vehicle off the stereo goes back to satellite radio instead of staying in Bluetooth aux. Is this normal?
I believe it is...the bluetooth is a chosen setting not a default
2. When unlocking the door by pressing the door handle sensor, is there a way to unlock all doors instead of just the driver?Go into EVIC menu and chose that option
3. Is there a way to disable the seat belt chime (there are times I don't need my belt, please don't turn this into a seat belt lecture)? you really know the answer to this...NO
WELCOME ABOARD AND LETS SEE SOME PICS OF THAT BLACKTOP!
Reply With Quote
  #4  
Old 05-01-2013, 09:31 AM
Clifford R/T's Avatar
Clifford R/T
Clifford R/T is offline
Veteran
 
Join Date: Jan 2013
Location: SouthWest Burbs of Chicago
Posts: 263
Default

Lets see some pics of the new ride. Congrats
Reply With Quote
  #5  
Old 05-01-2013, 09:52 AM
inyadreems's Avatar
inyadreems
inyadreems is offline
Veteran
 
Join Date: Apr 2013
Location: Staten Island, NY
Posts: 305
Default




Hey is there any way to find out how many Durango RT Blacktops were produced, in what colors and options? Just wondering how rare the color and option combo is.
Reply With Quote
  #6  
Old 05-01-2013, 10:12 AM
jwr9152
jwr9152 is offline
Professional
 
Join Date: Dec 2011
Posts: 180
Default

This worked on my 12 Charger, haven't tried it on my Durango.

Step 1. With the ignition switch in any position except On or Start, buckle the driver side front seat belt.

Step 2. Turn the ignition switch to the On position and wait for the seat belt indicator reminder function to conclude (about six seconds).

Step 3. Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.

Step 4. Turn the ignition switch to any position except On or Start to toggle the belt-minder feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed. (This does NOT disable the INITIAL chime, only the nagging repeats every few seconds).
Attached Images
 
Reply With Quote
  #7  
Old 05-01-2013, 11:47 AM
akmerle's Avatar
akmerle
akmerle is offline
Registered User
Thread Starter
 
Join Date: Apr 2013
Location: Wasilla / Kodiak, Alaska
Posts: 11
Default

Quote:
Originally Posted by jwr9152 View Post
This worked on my 12 Charger, haven't tried it on my Durango.

Step 1. With the ignition switch in any position except On or Start, buckle the driver side front seat belt.

Step 2. Turn the ignition switch to the On position and wait for the seat belt indicator reminder function to conclude (about six seconds).

Step 3. Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.

Step 4. Turn the ignition switch to any position except On or Start to toggle the belt-minder feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed. (This does NOT disable the INITIAL chime, only the nagging repeats every few seconds).
Does your charger have the push button start where you don't have any ignition to switch? I used a similar sequence on my 12 Ram work truck but it has turn to start ignition.

Thanks for the replies guys, will get some pics up hopefully today! This is the first SUV I have ever had after having Toyota trucks (last was 10 Tundra Rock Warrior) for nearly 20 years. Much easier with day to day driving and pulled my two place snowmachine trailer just fine on Sunday.
Reply With Quote
  #8  
Old 05-01-2013, 11:49 AM
FSTDANGO3's Avatar
FSTDANGO3
FSTDANGO3 is offline
Champion
 
Join Date: Nov 2006
Location: NORTH JERSEY
Posts: 2,541
Default

I really feel they should have put Black emblems on those as well.
STEVE
Reply With Quote
  #9  
Old 05-01-2013, 11:56 AM
CMil527's Avatar
CMil527
CMil527 is offline
Champion
 
Join Date: Mar 2012
Location: Old Bridge,NJ
Posts: 3,560
Default

Congrats and welcome!
Reply With Quote
  #10  
Old 05-01-2013, 01:04 PM
NUTTS12CREW
NUTTS12CREW is offline
Amateur
 
Join Date: Dec 2012
Posts: 36
Default

Quote:
Originally Posted by jwr9152 View Post
This worked on my 12 Charger, haven't tried it on my Durango.

Step 1. With the ignition switch in any position except On or Start, buckle the driver side front seat belt.

Step 2. Turn the ignition switch to the On position and wait for the seat belt indicator reminder function to conclude (about six seconds).

Step 3. Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.

Step 4. Turn the ignition switch to any position except On or Start to toggle the belt-minder feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed. (This does NOT disable the INITIAL chime, only the nagging repeats every few seconds).
This works for Most all Dodges. I did it to my 2012 DD the day I got it. Now, if only I could get the message to stop showing up on the display everytime I start from a stop!
Reply With Quote
 
 
Reply

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sharps40
Dodge Classics
20
09-15-2015 11:58 AM
kkxlt05
2nd Gen Durango
2
07-30-2015 01:40 AM
TNNuke
Dodge Ram Van
3
07-28-2015 09:50 AM
comedyman23
2nd Gen Ram Tech
3
07-26-2015 11:22 AM
Deerhunter90
1st Gen Dakota
1
07-16-2015 03:12 PM


Thread Tools
Search this Thread

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -4. The time now is 12:51 PM.


 
  • Ask a Question
    Get answers from community experts
What's your question?
Send