How do i remove the steering column tilt lever
12-07-2007, 04:18 PM
Join Date: Dec 2007
Location:
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
How do i remove the steering column tilt lever
How do I remove the steering column tilt lever on an '02 Ram Quad.
Trying to check the wiring for the a/c blower.
Thanks
12-07-2007, 04:58 PM
Join Date: Aug 2007
Location: N. Florida
Posts: 4,702
RE: How do i remove the steering column tilt lever
Seems a strange path. Not sure how removing the tilt control would allow access to the blower wiring. Perhaps someone has had to wrestle with this one before.
12-07-2007, 05:10 PM
Join Date: Dec 2007
Location:
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: How do i remove the steering column tilt lever
I am trying to check the wiring at the ignition to see if it is burned.
12-07-2007, 05:12 PM
Join Date: Dec 2007
Location:
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: How do i remove the steering column tilt lever
There was a recall on that. The blower has been working more intermittently, and finally quit all the way, since the recall was fixed. I just wanted to see if this was the problem.
04-22-2012, 05:07 PM
Join Date: Apr 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I have had the same blower issues.
I purchased a new ignition switch, I removed the screws to remove the upper and lower cover. I cannot figure out how to remove the tilt wheel lever or lever handle. The rubber paddle type handle is attached to the lever. How do you get the rubber paddle handle off to remove the lever?
04-22-2012, 10:48 PM
Join Date: Dec 2010
Location: Timmins, ON, Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Nice ressurection man, but twist and pull on the rubber part, it'll go.... assuming your truck is the same setup as mine?