You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
i have my 2003 dodge ram 4 dr v8
and my a/c inside cab blower is not pushing air ,, at high spped,,
it works ,,,but not okay,,very litlle air is blowing inside,,
i go from the low to high it works ,,but the fans it looks that is going slow and then pickups litlle at high and that all
i have check the a/c and is filled full,,and the pipe is cold!,
and other thing,, when i put to max i can hear big wind noise under the dash at passager side,, the big black box under the dash ,,im thinking that something is not opening inside,maybe stock,,or broken,,
any advice on this will appreciate,,
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
1995 Dodge Ram 1500 - v8 5.2l 240k miles
How does everything work if you run the vent or heat? Does the fan then work correctly?
I know that these trucks have known issues with the blend doors, but if that was the problem you would probably just have heat. I beleive there is another door for the ac somewhere by the heater core. I don't have my laptop with the manual for my truck or I'd try to look it up. Maybe someone else will chime in with the correct name. Could also be the blower motor going bad..
2003, 1500 4.7, CAI, detroit true track, 4.10 gears, HO cams, e-fan, jet scoop, 180 stat, TCI torque converter, 69mm fastman TB, 08 intake manifold, underdrive pullies, moes fan shroud delete, Gibson shorty headers, magna flow hi flow cat split to dual exhaust after the cat, superchips tune.
In case it's relevant, I had all fan noise, not much air on my 2006. I took out the glove box to have a look-see (no tools required...BONUS!) and shined a light up to see through the plastic grating that I had no air recirc door. I commenced to break off the worthless grate and reached down to find it laying in the bottom of the box, preventing the fan from doing it's job. I pulled it out, and now have all kinds of air, just can't shut off outside air until I get a new door.
For you, maybe the problem can be found by going in like I did and making sure the door is in place, doesn't move when you press a pencil against it, etc.
Check out heatertreater.net for a video series that details all the various blend doors and troubleshooting. 3 vids, 6-7 mins each. Well worth the time!