3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Dodge ram 1500 5.7lt won't idle

Thread Tools
 
Search this Thread
 
  #1  
Old 09-08-2009, 10:48 PM
ooldman's Avatar
ooldman
ooldman is offline
Registered User
Thread Starter
Join Date: Sep 2009
Location: Middle of nowhere, utah
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Dodge ram 1500 5.7lt won't idle

I have a 2004 dodge ram 1500 5.7 lt that will not idle. It won't start unless u press on the gas. I had the check engine light checked and the codes pointed to the O2 sensors. I replaced the front two sensors but still no luck. I don't live close enough to a town that can check the codes for me that I can drive the truck too. My question is will the O2 sensor prevent the truck from starting? Is there something else the will make the O2 sensors to not work right? Also when the truck is on the exhast smells really lean. I have 90,000 miles on the truck


HELP!!!!
I love my truck
 
  #2  
Old 09-08-2009, 10:52 PM
draco8494's Avatar
draco8494
draco8494 is offline
Captain
Join Date: May 2008
Location: Inverness
Posts: 731
Likes: 0
Received 0 Likes on 0 Posts
Default

well the o2 sensors will make it run lean because they control how much fuel is entered into the combustion chamber, you can take back the front 2 sensors and get the back sensors and see if that clears things up, those things are like 80 a peice right??
 
  #3  
Old 09-08-2009, 10:52 PM
dazed01's Avatar
dazed01
dazed01 is offline
Veteran
Join Date: Aug 2008
Location: killeen texas
Posts: 295
Likes: 0
Received 0 Likes on 0 Posts
Default

I would look for a vacuum leak first. I'm not sure if your truck has drive by wire or not but if it doesn't I would check the iac and see if its working right. But a vacuum leak may cause lean 02 codes and will make the fuel trims very high.
 
  #4  
Old 09-08-2009, 10:53 PM
dazed01's Avatar
dazed01
dazed01 is offline
Veteran
Join Date: Aug 2008
Location: killeen texas
Posts: 295
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by draco8494
well the o2 sensors will make it run lean because they control how much fuel is entered into the combustion chamber, you can take back the front 2 sensors and get the back sensors and see if that clears things up, those things are like 80 a peice right??
The rear 02's shouldn't have much if any control over fuel trims.
 
  #5  
Old 09-08-2009, 10:58 PM
draco8494's Avatar
draco8494
draco8494 is offline
Captain
Join Date: May 2008
Location: Inverness
Posts: 731
Likes: 0
Received 0 Likes on 0 Posts
Default

oh it is drive by wire, and i was just throwin some info, my ford had an 02 sensor that went out and they couldent tell me wich one....so i drove around untill i could play the guessing game of wich of the 4 it was and my exhaust was real rich and idled crappy...but it was also a front 02 sensor....
 
  #6  
Old 09-08-2009, 11:09 PM
ooldman's Avatar
ooldman
ooldman is offline
Registered User
Thread Starter
Join Date: Sep 2009
Location: Middle of nowhere, utah
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

I checked for a vacuum leak but could not find any. Also here is the IAC located at? I'm going to check that next.
 
  #7  
Old 09-08-2009, 11:12 PM
ooldman's Avatar
ooldman
ooldman is offline
Registered User
Thread Starter
Join Date: Sep 2009
Location: Middle of nowhere, utah
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Oh the front O2 sensors were $25 ea, but the back left is $25 and the back right is $65 not sure why. got them from autozone
 
  #8  
Old 09-08-2009, 11:17 PM
ooldman's Avatar
ooldman
ooldman is offline
Registered User
Thread Starter
Join Date: Sep 2009
Location: Middle of nowhere, utah
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

I checked for a vacuum leak but could not find any. Also here is the IAC located at? I'm going to check that next.
 
  #9  
Old 07-24-2014, 01:38 PM
electraflh's Avatar
electraflh
electraflh is offline
Registered User
Join Date: Jul 2014
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by draco8494
well the o2 sensors will make it run lean because they control how much fuel is entered into the combustion chamber, you can take back the front 2 sensors and get the back sensors and see if that clears things up, those things are like 80 a peice right??
o2 sensors ebay 16 bucks apiece
 
  #10  
Old 07-24-2014, 01:44 PM
electraflh's Avatar
electraflh
electraflh is offline
Registered User
Join Date: Jul 2014
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ooldman
I checked for a vacuum leak but could not find any. Also here is the IAC located at? I'm going to check that next.
no iac on 5.7 drive by wire, check for p0404, egr code, it fixed my problem and was only 22 bucks on ebay with free shipping, and 30 min fix
 


Quick Reply: Dodge ram 1500 5.7lt won't idle



All times are GMT -4. The time now is 01:29 PM.