How to remove belt tensioner pulleys?
#1
#2
YAy! i got it! lol i just didnt wanna strip the bolts but i tried it and they unbolted from the front! .. Well. Would someone tell me how to remove the windshield washer container? It looks like it just slides in on a slot in the fan shroud but it doesnt want to slip out? any thoughts? thanks!!
#4
Join Date: Dec 2006
Location: Wheatley Ontario, Canada.
Posts: 295
Likes: 0
Received 5 Likes
on
5 Posts
When I pulled mine. I slipped a small butter knife in between the bottle and shroud. Apply very little pressure against the bottle, while pulling the bottle up, that should disengage the tangs. Be very gentle. I would not try removing it if it is really cold out. Might crack the plastic.
Took me a while to figure it as well.
Good Luck
Took me a while to figure it as well.
Good Luck
#5
Question about the pulleys..
Im replacing 2 pullys the grooved belt tensioner and the smooth idler pulley. Is the smooth one supposed to be bigger? than the grooved one?? Because i baught the replacements and the grooved one is the same size as the old one but the new smooth one is bigger than the old one. The old ones are matching in size. Autozone told me maybe the previous owner put a different smooth pulley on the truck?