When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I had to get mine pressed out as well. The shop said their 100 ton (or something like that) press usually never hesitates but did with them, so I was not going to get them with the dang hand turned press
The upper isnt replaceable, you have to get entire UCAs. I think they are only 110/each though.
There's a seller on ebay that sells them. But they are from a place called airbagit. That's if you only want the spindles though. If you want a whole kit thats a different thread. And FYI the OP of this thread is no longer on here as he bought a new truck (Ford).
I want to put a 3 in spindle lift on my 2006 dodge ram 1500 but I am unsure what brand to buy so what brand did you buy or where did you get them
I got 3" spindles for my 06 1500 from a seller called pricebusterchris on eBay, haven't put them in yet but they look high quality and they shipped fast even to Canada.
Lift singles don't change the suspension geometry either as all they do is place the tire hub lower in the spindle which raises the truck
Lift springs will cause a more stiff ride
Both my "airbag it.com" and "max trac suspension" spindles pushed my front tires out around 1".
Those are the only two your gonna be buying unless your wasting money on cst spindles.
It's clear to see because I have a very tight parking spot at work and when parked dead parallel against the line the front tires hang over and backs don't