3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Malfunction Indicator Light

  #1  
Old 07-06-2011, 09:37 AM
boopadoopa's Avatar
boopadoopa
boopadoopa is offline
Professional
Thread Starter
Join Date: Jul 2008
Location: Freedom Pa.
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Default Malfunction Indicator Light ***Solved****

Coming home from camping Monday My light came on and stays on. I did the Key on/off/on/off/on/off/on and the odometer goes to ------------- then says "done"
But no code is flashed? But the light is staying on? Think pulling the battery terminal for 30 minutes or so will reset it and turn it off? Maybe Ill go to Auto zone and get it checked on way home but if no code is showing when I test it do you think they will get a code?

Also do I pull the positive terminal or negative or doesn't it matter? any one will break the circuit so it shouldn't matter?
 

Last edited by boopadoopa; 07-07-2011 at 09:36 AM. Reason: found problem
  #2  
Old 07-06-2011, 10:17 AM
HammerZ71's Avatar
HammerZ71
HammerZ71 is offline
Administrator
Dodge Forum Administrator
Join Date: Jul 2007
Location: South Georgia/East Florida
Posts: 24,686
Likes: 0
Received 20 Likes on 19 Posts
Default

Take it to the auto parts store and have them pull the code. In all likelihood it's just an EGR (normal wear item and about the right time to go out on an '07), or some other minor sensor...
 
  #3  
Old 07-06-2011, 11:00 AM
boopadoopa's Avatar
boopadoopa
boopadoopa is offline
Professional
Thread Starter
Join Date: Jul 2008
Location: Freedom Pa.
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Default

Thats what i figured I got 59000 miles on it I just thought a code would show when i turned the key in sequence.. No biggie.. ill take it today
 
  #4  
Old 07-07-2011, 09:34 AM
boopadoopa's Avatar
boopadoopa
boopadoopa is offline
Professional
Thread Starter
Join Date: Jul 2008
Location: Freedom Pa.
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Default

So my code turned out to be a P0524 Low Oil Pressure I found this in the search of the forum

https://dodgeforum.com/forum/3rd-gen...1500-hemi.html

Good stuff and it helped me out... Thanks
 


Thread Tools
Search this Thread
Quick Reply: Malfunction Indicator Light



All times are GMT -4. The time now is 04:29 PM.