In-Dash Navigation System Problem
#1
In-Dash Navigation System Problem
I am the original owner of a 2006 Ram 3500 Cummins 5.9l. I have just begun to have problems with my in-dash navigation system (Code REC). After a short period of driving I will get a "NAV Message" warning telling me there is a "disk error". If I turn off the ignition and restart, things are OK for a few miles/minutes before I get the same error message again. Once the error message shows up the nav screen is blocked by the message window and cannot be used for navigation. Only turning off and back on removes the message. I've tried removing and reinstalling the nav DVD, but this only temporarily restores the system until the next "disk error" message.
Has anyone else experienced anything like this and if so what did you do about it? Thanks. John Hixson
Has anyone else experienced anything like this and if so what did you do about it? Thanks. John Hixson
#2
First thing I would try is a lens cleaner disc. If that doesn't help, I would then try a different/new nav disc. If that fails to remedy the issue, then it's time for a new REC unit.
I'm currently using a burned DVD-DL, and the first two would not read for crap. Third disc I burned at the lowest possible speed, and it's never given me a single error. Keep that in mind if you're not using an OEM disc.
I'm currently using a burned DVD-DL, and the first two would not read for crap. Third disc I burned at the lowest possible speed, and it's never given me a single error. Keep that in mind if you're not using an OEM disc.
Last edited by Brandon Anderson; 01-09-2012 at 09:49 AM.
#3
#4
How much?
#7
Trending Topics
#8