Need Help on choosing an Intake
#1
Trending Topics
#8
You asked for help and then downed what the man said quickly with little to no experience on here when this topic has been covered hundreds of times and you could have searched the topic or just looked in the DIY section and these is a sticky thread of all intakes used and gains
So that being said PVC pipe will work perfect and it cost about $200 cheaper and you will see same gains
So that being said PVC pipe will work perfect and it cost about $200 cheaper and you will see same gains
#9
Join Date: Jul 2007
Location: South Georgia/East Florida
Posts: 24,686
Likes: 0
Received 20 Likes
on
19 Posts
There are only two materials I see out there, ABS plastic and chromed covered ABS. Pay $300 if you want, but the gains from a CAI alone are still going to be in the 5-8 whether you make one or buy one and plastic is still plastic.
The Vararam types are going to give the best gains BUT you risk taking on water to the engine because they get the air from under the front bumper and besides, the tubes ARE STILL PLASTIC...
The Vararam types are going to give the best gains BUT you risk taking on water to the engine because they get the air from under the front bumper and besides, the tubes ARE STILL PLASTIC...