Changed gears... Now ABS light on
01-23-2014, 07:17 PM
Registered User
Thread Starter
Join Date: Jan 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Changed gears... Now ABS light on
So I changed from 3:55 to 4:56 gears with a posi... The ABS light is on and engages like it should as if you were sliding under normal braking conditions. Does anyone know the cure for this?
01-23-2014, 11:46 PM
Hall Of Fame
Hall of Fame Member
Join Date: Mar 2009
Location: South GA
Posts: 19,166
Service manual says you are supposed to remove the sensor on top of the diff housing BEFORE pulling out the diff. I would replace the sensor
01-24-2014, 03:20 AM
Join Date: Nov 2005
Location: North Eastern England
Posts: 2,875
Likes: 0
Received 0 Likes
on
0 Posts
Did you make sure the "tone ring" was reinstalled back onto the ring gear?
It's been missed out before.
Al.
01-28-2014, 11:14 AM
Registered User
Thread Starter
Join Date: Jan 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys thanks for the input. Been too damn cold to try much. But I replaced the sensor. Abs light is still on. I believe the abs was actually engaging cause of the speed sensor on hub. Cleaned it up and it's all good. Still blinking abs light though.