2003 Ram 5.7 Hemi - DodgeForum.com

3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2003 Ram 5.7 Hemi

Thread Tools Search this Thread
Old 02-28-2014, 11:04 PM
TJZ_Hemi's Avatar
TJZ_Hemi TJZ_Hemi is offline
Registered User
Thread Starter
Join Date: Feb 2014
Posts: 1
Default 2003 Ram 5.7 Hemi

Truck has been a menace in the last year!!

Had a misfire problem:
Replaced plugs, wires and coils. Problem was a broken spring (Fixed by my mechanic):Replaced all springs in the bank, checked compression and other vitals.

Accel 457S - Plugs
MSD 32039 - Wires
MSD 82568 - Coils
K&N Air Filter (Put in when we bought it in 06)

Shortly thereafter is threw Cam sensor position error so I replaced the sensor. Not 50 miles later is started stuttering again and threw the following errors:

Just as a note, shortly before the cam sensor error all but the rear passenger side turn signals stopped working. The signal switch has been replaced and been through extensive research and testing to no avail yet.

So, before I take it back to the mechanic, anyone want to throw out some more suggestions?
Reply With Quote
Old 03-01-2014, 05:24 AM
tantofolder's Avatar
tantofolder tantofolder is offline
Join Date: Apr 2011
Vehicle: 07 Ram 1500 5.7
Location: VA
Posts: 124

My manual says:
PO300- Multiple cylinder misfire
PO339- Crankshaft position (CKP) sensor intermittent

My manual does not have a code PO315. Maybe the new sensor was bad too. Sorry that's all I got. I'm sure more knowledgeable folks will chime in.
Reply With Quote
Old 03-01-2014, 08:32 AM
Dubl0Vert Dubl0Vert is offline
Registered User
Join Date: Apr 2010
Posts: 15

check your grounds......battery main, fender connection, engine to frame....9/10 times intermittent issues are ground related.

Take back to mechanic....he did not diagnose and fix.....he just threw parts at it and didn't test it.
Reply With Quote
Old 03-10-2014, 11:48 PM
RacerHog's Avatar
RacerHog RacerHog is offline
Join Date: Oct 2012
Vehicle: 1977 Dodge D150 P.U. (WarLock)
Location: So-CAL
Posts: 49

Bad Sensor or the pick up ring came loose.... Causing it not to be able to Phase itself....
Reply With Quote
Old 03-11-2014, 12:23 AM
p38251 p38251 is offline
Record Breaker
Join Date: Feb 2011
Vehicle: 2012 Ram 2500HD Crew Cab 6.7
Location: Vanderpool Texas
Posts: 1,690

Put copper plugs, 5.7 doesn't like fancy plugs.
Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Mileage onlyadeadman 3rd Gen Ram Tech 12 08-29-2015 08:23 PM
What in the world IS THIS?? ELMST 3rd Gen Ram Tech 33 08-27-2015 10:13 AM
Proud new owner of a 2003 Dodge Cargo Van! Need help finding a Few Things! Thanks! ProudDodgeOwner Dodge Ram Van 6 08-13-2015 09:32 AM
axle seal ???? pigcatshiner 2nd Gen Dakota 1 08-08-2015 05:22 PM
Want to buy Ram Diesel 2500 ro 3500??? sonnychi Dodge/Ram Diesel 12 07-28-2015 01:53 AM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

All times are GMT -4. The time now is 10:06 AM.