When I get another set, i should say if, I was going to cut my current bracket, and make a custom round mount bar, this way I could run the wiring through the bar for a cleaner look. it would be a bent bar, shaped like a half moon, then weld the two end to the crossmember.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
__________________
2004 4.7 QCSB 4x4SILVER TRUCK CLUB MEMBER #3, Hella 500 Club Member #10 MODS: TGC 2.5" leveling kit, Spectre intake, Coffin Muffler, 12,000 lb Mile Marker, HELLA500 "Just blind the $hit out of people"
Sponsored Links
Registered users do not see this ad. Click here to register for free!
When I get another set, i should say if, I was going to cut my current bracket, and make a custom round mount bar, this way I could run the wiring through the bar for a cleaner look. it would be a bent bar, shaped like a half moon, then weld the two end to the crossmember.
You would sh*t your pants if you saw my wiring in my truck for the Hellas. It's so cluttered, between the ballasts, original wires, and extra wire. I need to figure someway to pull the wires closer together.
I just picked up a pair at walmart 63.99 Now I have to figure out how to install. Where is that rubber gromet where u can push your wires through? Im assuming you have to disconnect battery right. I have never done anything electrical
Dang it, i dont have the link bookmarked on my new computer. Oh well.. good luck.
__________________
2004 4.7 QCSB 4x4SILVER TRUCK CLUB MEMBER #3, Hella 500 Club Member #10 MODS: TGC 2.5" leveling kit, Spectre intake, Coffin Muffler, 12,000 lb Mile Marker, HELLA500 "Just blind the $hit out of people"
Hella 500ff
