Aero Exhaust AT3030XL - Page 3

TheFist · #21 09-25-2009, 06:26 PM

Where is the resonator usually located? I need to look and see if I have one.

This ad is not displayed to registered and logged-in members.
Register your free account today and become a member on Dodge Forums!

ArkHemi · #22 09-25-2009, 09:04 PM

On the 06 it is right behind the rear wheel well and just before the pipe comes out behind the wheel.

Bluesmanjesse · #23 09-25-2009, 09:16 PM

THe '06's have 2 resonators one up under the cab and one before the tail pipe the muffler is in between the 2.At least thats how mine is.

lxman1 · #24 09-25-2009, 11:38 PM

Yep, 06 has one before and one after the muffler. My 08 only had one in the tailpipe

OlDirtyJohn · #25 09-26-2009, 01:03 AM

my 04 didnt have a resonator at all!!

TheFist · #26 09-26-2009, 10:23 AM

I've got an 07 and don't think it has one either.

I'm getting ready to have the magnaflow Y pipe installed and swap the magnaflow muffler thats on it for a Flowmaster 50.

SilentRamAD · #27 11-04-2009, 01:38 AM

Any input on how the in-cab noise is at highway speeds ? I'm going to be running 2000-2200rpm at 60-70mph so I'm looking to ditch my Delta 50 Dronemaster . . .

OlDirtyJohn · #28 11-04-2009, 02:50 AM

Quote:

Originally Posted by SilentRamAD

Any input on how the in-cab noise is at highway speeds ? I'm going to be running 2000-2200rpm at 60-70mph so I'm looking to ditch my Delta 50 Dronemaster . . .

with my unresonated at3030 there is next to no drone at those rpms. the only drone that you can hear in the cab with the windows up is about 1500-1700. but i usually never cruise at those rpms anyways. other than that, the muffler is loud, but sounds good, and doesnt have a horrible drone like most flowmasters.

ArkHemi · #29 11-04-2009, 03:34 AM

I would say on mine that there is little to no drone at all at highway speeds. I have MDS turned off so that isn't a problem either.

dr650rider · #30 11-07-2009, 10:41 AM

Just wanted to thank ArkHemi for posting this one. It helped me make my decision for the resonated (XL) version. I just had it installed yesterday. The shop custum bent a 3" stainless pipe and routed it pretty much the same as stock. For the muffler, stainless pipe, tip, and install I paid about $360. It's plenty loud and it performs awesome. I haven't told the wife about it yet though. I can't wait to see her face when I first start it up for her.