I can have them all shipped to me then shipped out for $8.00 a piece.
mighty kind of you sir, but at $55 as a group rate +$8 shipping, you're still lookin at $63. its $3 cheaper to go with the standard rate of $60 shipped.
even for the group rate of $55 with free shipping, im still not ready to pull the trigger for a $5 savings
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
Is there a difference between the light these bulbs put out and the $200 bulbs?
I have projector housings, Use H1 bulbs. I would also like to put brights in, I mean real brights, Is that Bi-xenon? I realize flashing is out because there is a bit of warm up time. But If I go offroad in the woods, I want to see what im am looking after. I think what I am wanting is the ability to light up the "Brights bulbs" and projectors at the same time.
Also what bulbs are the factory fogs using? As when I do this im upgrading these fogs to.
Is there a difference between the light these bulbs put out and the $200 bulbs?
I have projector housings, Use H1 bulbs. I would also like to put brights in, I mean real brights, Is that Bi-xenon? I realize flashing is out because there is a bit of warm up time. But If I go offroad in the woods, I want to see what im am looking after. I think what I am wanting is the ability to light up the "Brights bulbs" and projectors at the same time.
Also what bulbs are the factory fogs using? As when I do this im upgrading these fogs to.
Thanks guys for any help you can give me.
Theoretically, the light output should be the same. ''Xenon'' (although is the gas in the bulb) is usually referred to as a single beam bulb whereas ''Bi-Xenon'' is usually referred to as a Hi/Lo beam setup. Usually the stock OEM bulbs in the fogs is 9006.
hey Weedahoe, you got HIDs in the stock housing right? any ideas if you are blinding people? also, the headlight is a 9007 right? these guys don't seem to be offering that, is a 9006 the same thing?
hey Weedahoe, you got HIDs in the stock housing right? any ideas if you are blinding people? also, the headlight is a 9007 right? these guys don't seem to be offering that, is a 9006 the same thing?
3rd gen ram 2007 anyway is a H13 (9008) dual beam in the headlights and the fogs are a single bean 9006
As long as you properly adjust your lights you will not blind people. Since Cmherrmann already answered you other Q lemme just clarify that 9006 and 9007 are not the same. Also keep in mind my truck is lifted and no one flashes me.
Ok so should I get 2 h1 gets if I want to do brights and standard lights? Is there a special way to wire them to be able to light em up at the same time when I am offroad?
Mods:Bed Liner, Chrome gas cap, 20's, 275,65 NTG, leveling kit+shocks, XDI intake, 50 Flows, Apline deck, 3-10" RF P2D4's, 1001 RF BD Amp, 2 farad, stubby ant., Tint, Painted Eyelids, Stay Tuned.
