has any one installed a body lift on a 03 or similar year and did you remove everything suggested
im hopefully installing a body lift this weekend and the pa instructions say to remove temporaily the washer resivour the overflow resivour, several line and cable clips or tabs among many other things. has any one installed a body lift on a 03 or similar year and did you remove everything suggested im not against removing everything but id love to get away with not doin it. but if complications will occur ill do it
also any tips on the install thanks
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
__________________
2003 REG CAB SHORT BED 4x4 6inch lift 35" toyo mts
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Yes, you have to remove everything in the directions. Especially the reservoirs since you will be removing the fan shroud. Just follow the steps one at a time and you'll be done before you know it.
i installed one a couple months ago on my 03. i did everything the PA instructions said except vutting and extending the gas lines. i was going to but the guy that helped me said lets see what happens when we lift the bed. everything was fine.
__________________
2003 QCSB 5.7 HEMI 4x4, 3" PA body lift, 35" Toyo M/T's on 17" M/T Classic II's,
DIY Intake, Flowmaster 40 dual exhaust, Power wire, TMR bypass, Superchips 3865
The instructions are good but some parts of it are a little ambiguous. Just take it easy and keep the beer flowing. All should be good. Mines 03 by the way.
__________________
03 QC 1500 Ram 4x4 5.7 V8
K&N CAI 37x13.5x18 FC-II 18" Procomp 1059
Magnaflow Dual Exhaust 3" P.A. Body Lift
146,000 plus miles and still running strong!
body lift pre dissasembly
