EGR Valve replacement.

racer60m · #1 08-20-2009, 01:19 PM

Anyone had to change out the EGR Valve on a 2005 Ram w/Hemi? Do I need any special tools? Should I be aware of anything? Not going to let the stealer charge me $200 just in labor.

Thanks,

Chris

This ad is not displayed to registered and logged-in members.
Register your free account today and become a member on Dodge Forums!

chefred112 · #2 08-20-2009, 02:40 PM

no..one of the easiest things to change...unclip tube by tb, remove 2 screws from tube to egr, unplug harness from egr, unbolt 2 screws holdin egr to head..that's it..

racer60m · #3 08-20-2009, 03:55 PM

Sounds simple enough. Thanks!!!

Horseapples · #4 08-20-2009, 05:04 PM

pretty simple to change

Hemi1500_600RR · #5 08-20-2009, 06:46 PM

I had an issue with mine and just cleaned it and everything worked like new. Might wannt try that before spending the cash. Its up to you though. Carb Cleaner does wonders!

travisfimple · #6 08-21-2009, 06:52 PM

I always had issues with mine in my 2004 ever since I installed headers. It went out almost immediately but it's an easy change as mentioned above. And only about $40 and 10 minutes worth of work. Then I always had an error code saying too low pressure reading. Seems my headers were sucking all the exhaust out and not letting enough through the little exhaust tube. It still ran good after I replaced it the first time but it was always a troublesome part. Just an FYI if you have aftermarked exhaust or headers.