When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4th Gen Ram Tech2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
the switch comes with the kit you just have to put it in it looks identical to your old one other then you push in to get the fogs to come on and a greent lights lights up on your dash telling you there on.
Thanks for all the reply's, im waiting for the kit to arrive and if i decide to install them on my own i will post info on installation. Doe's anyone know if you take the plastic piece in the bumper out and leave it out or do you cut holes in it where the lights go?
I left the plastic peice in but cut holes in it, looks a lot cleaner, but had to do lots of trial and error in cutting... At the time i installed the tow hooks too, again, just cut the plastic to go around them. I've seen a few installed by dealer, and they just trash the plastic thing...
I had my done at the dealer because they had to go on the computer anyways, it took them 2 hours labour so approx. 200$ with taxes Cdn. They told me it would be an hours labour just for the computer setup.