Last word on vvt vct and fuel saver

[CJDTAUTOTECH]

The message is in the cluster next to the odometer , its a lcd display im sure it can be programed , My factory rep told me he will inquire about it but he also said they are trying to pay the bills and get the factorys back so it wont be a high on there list Im sure.

This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!

[usp45compact]

Originally Posted by 94rt10ohio

My truck was built after Dec but before March. Has the VCT Hemi and the Fuel Saver light. So the VCT can do the light, the question is, what changed in Dec for them to say it is not possible.

Where are you guys able to find the date your vehicle was manufactured?

[BubbaRadioNetwork]

It's on the label inside the drivers door that has the tire pressure on it. On the bottom line it will say MDH followed by 6 numbers. That stands for month, day, and hour. For example, mine says MDH:022114 That is February (02), 21, 2pm (1400 hours)

[usp45compact]

Originally Posted by BubbaRadioNetwork

It's on the label inside the drivers door that has the tire pressure on it. On the bottom line it will say MDH followed by 6 numbers. That stands for month, day, and hour. For example, mine says MDH:022114 That is February (02), 21, 2pm (1400 hours)

Thanks!

[jawman]

I don't have the light and I am glad! I think it would get kind of annoying myself!

Just MHO

[72combo]

The spot where the fuel saver light comes one is the spot on my truck that tells me my cruise is on so I cannot see anyway to reprogram that ..

[JINXR]

Here's a reply I got back from the regarding the Fuel Saver Light.

Dear JINXR:

Thank you for contacting the Chrysler Customer Assistance Center
regarding your 2009 Dodge Ram.

We appreciate the time and effort you took to write to us. We have
reviewed your email in regards to the Fuel Saver light for your vehicle.

In response to your email, we suggest that you please contact the local
Chrysler authorized dealership. The technicians at our dealerships are
experts at servicing Dodge vehicles. Their state-of-the-art diagnostic
equipment is designed specifically for your vehicle; it's able to read
fluid and emissions levels and diagnose electrical and mechanical
functions to ensure your vehicle is operating at maximum efficiency.

Furthermore, the dealer would be able to inform you if you can add the
Fuel Saver light to your vehicle and would also be able to assist you
with other options.

You can find a dealership locator in the "Find a Dealer" area on the
Chrysler web site at (http://www.chrysler.com), on the Dodge site at
(http://www.dodge.com) and on the Jeep site at (http://www.jeep.com).

Thanks again for your email. We value you and your business.

Sincerely,

Roger Shaw
Customer Service Representative
Chrysler Customer Assistance Center

[Husker_Ram]

Just noticed the light on my Ram today after I filled up. Never noticed it until today as I was looking at the average mpg display. The light goes off when coasting down a hill and seems to come on when you barely have your foot on the gas on a flat or slight downward road. Was going 30 - 40 mph at the time. Unless you're looking, can't really tell it's there in the cluster of LCD characters.

I have VCT, with locking tailgate with a build date of 120512, Dec 12 @ noon.

[joe68]

Just out of curiosity how can you tell if you have a VCT or VTT engine?

[topgun]

I think they are the same, just worded differently.

Thought I'd add this link to the thread where the MDS indicator was added to a truck previously without one.