Please help removing Ram badge glue!!

Beerme · #1 07-16-2009, 07:28 PM

Ok so l got the RAM badges off with no problem.But l can't get the glue off!! Tried ronson lighter fluid,wd-40,tar and bug remover,and the hair dryer.Got most of it off with the hair dryer and rubbing till my fingers were blistered,but theres still a layer of glue,mostly the M. Any secrets to get this off would be much appreciated.Thanks

This ad is not displayed to registered and logged-in members.
Register your free account today and become a member on Dodge Forums!

Spokane_Dodge · #2 07-16-2009, 07:35 PM

Try 3M adhesive remover. Comes in a red aerosol can. Worked great for me.

'95Dakota · #3 07-16-2009, 07:59 PM

GOO-GONE!!! It might only be Canadian... lol

stealthgoat · #4 07-16-2009, 08:39 PM

Quote:

Originally Posted by '95Dakota

GOO-GONE!!! It might only be Canadian... lol

I second the goo-gone!!!

DevilsReject · #5 07-16-2009, 08:53 PM

Quote:

Originally Posted by Beerme

Ok so l got the RAM badges off with no problem.But l can't get the glue off!! Tried ronson lighter fluid,wd-40,tar and bug remover,and the hair dryer.Got most of it off with the hair dryer and rubbing till my fingers were blistered,but theres still a layer of glue,mostly the M. Any secrets to get this off would be much appreciated.Thanks

Everyone in the post has named something that will work. Goo Gone is your friend. Spray it on thick, let it soak in the glue...and literally within a minute or two u can take a nice sponge or rag and it should be able to rubbed off.

Ryan Albert · #6 07-16-2009, 10:15 PM

Magic Eraser will take it off in 30 seconds. Hooks to a drill any place that sells auto paint should sell them, its AKA a pinstripe remover.

94rt10ohio · #7 07-16-2009, 10:18 PM

Hair dryer and fingers, no wonder you are blistered

I used something similar to goo gone.

I found the side which was in the shade while in 75 degree weather came off MUCH easier than the sunny side. The shaded side I almost pealed the double sided tape stuff off in complete lettered chucks.

Beerme · #8 07-16-2009, 10:45 PM

Thanks guys will try goo-gone tommorow,will let you know

Beerme · #9 07-16-2009, 10:47 PM

Hey Ryan, when you put your leveling kit on did you have to have the front end realigned or anything?

Beerme · #10 07-16-2009, 10:48 PM

Quote:

Originally Posted by Ryan Albert

Magic Eraser will take it off in 30 seconds. Hooks to a drill any place that sells auto paint should sell them, its AKA a pinstripe remover.

--
Hey Ryan, when you put your leveling kit on did you have to have the front end realigned or anything?