code p0302
01-11-2007, 04:32 PM
Join Date: Dec 2004
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
code p0302
I have an intermittent missing. I pulled a code 302 when the check engine light came on. I have changed the cap and rotor and the plugs. I have 95000 miles on the truck and I am sure this is the first time the plugs and cap have been changed. I will change the plug wires out tomorrow and see if that fixes it. Any other ideas would be greatly appreciated/
01-12-2007, 04:03 AM
Join Date: Jan 2007
Location:
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
RE: code p0302
really stupid question you did clear the computer after you changed all that
01-12-2007, 05:01 PM
Join Date: Dec 2004
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: code p0302
Not a stupid question. But yes I did clear the computer.
01-12-2007, 09:08 PM
Join Date: Jan 2007
Location:
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
RE: code p0302
haveyou tryed checkingchecking number two cylinder for spark if ur getting spark to the end of the wire then i might be a bad or dirty injector
01-13-2007, 11:21 PM
Join Date: Dec 2004
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: code p0302
I figured out that the spark plug wire was on the the exhaust pipe. I will replace the wires tomorrow.
01-14-2007, 01:12 AM
Join Date: Mar 2004
Location:
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
RE: code p0302
There was a recall on something with that call coming up frequently. I have the same thing on mine and dealer fixed no charge!
01-14-2007, 01:34 PM
Join Date: Jun 2005
Location: Riverton, UT
Posts: 14,228
RE: code p0302
God created the Hemi but mine does just fine.
01-16-2007, 01:39 PM
Join Date: Dec 2004
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: code p0302
I replaced the wires and she runs great. Amazing what a tune up will do. 95000 miles and the wires finally broke down. Plugs actually looked good still.
01-16-2007, 01:44 PM
Join Date: Jun 2006
Location: Reno, NV
Posts: 4,186
Likes: 0
RE: code p0302
You ran the stock wires for 95k?!?! That's quality right there but you'll save some gas now with the new ones. Might as well change the distributor as well if you haven't. I can't wait to get back ahead of myself with the bills that came with my move. I want to get my t/s lift, flowmaster, and MSD ignition components.
01-17-2007, 07:49 PM
Join Date: Jan 2004
Posts: 12,813
RE: code p0302
maybe it's time to clean the o2's also??? preventive maint goes a long way.