got me some bling. . .
they were on a slight back order, however I like the results. . .looks very slick
anyway, to the shifter. here is what the stock shifter looks like for the NV5600. . .and as you can see I have a slightly inverted H pattern
to remove the old ball just get a small flat tip and pry the center cap out.
once you have the center cap out, it just takes a 15mm socket to remove the retaining nut, then the stock shifter ball just spins off.
__________________
4/28/07 392hp 716tq on the stock clutch
10/20/07 425hp 798 still on the stock clutch
BIG THANKS to David and the guy's at James O'neal Dodge.
YOU GUY'S ROC