Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Engine Guides
- Dodge Ram: How to Reset PCM and Check Engine Light
Step by step instructions for the do-it-yourself repairs
Browse all: Engine Guides
correct way to reset computer?
#1
The following users liked this post:
Dodgedodoo (11-01-2021)
#2
#3
RE: correct way to reset computer?
i dont think it is necessary to reset our comps, though i do do it myself. our comps are learning so they will adjust on there own. i like seeing results immediately after a mod, so i disconnect the battery and then turn the ignition as if to start so that the starter pulls any residual current left in the truck.
#5
#7
RE: correct way to reset computer?
Now for the right way to completey reset it.
To reset the pcm
Leave battery CONNECTED, DO NOT DISCONNECT IT.
Buckle the driver seat belt so that it won't cause chimes that will be confusing.
Remove the PCM/SKIM fuse from the fuse box. Its marked on the bottom of the fuse box lid.
Insert key and turn all the way to START and hold it there until you hear 2 chimes. The truck will not turn over.
Remove key, unbuckle seatbelt, replace fuse, done.
The first time you go to start it, there may be a delay for cranking for a second or two. This is normal.
To reset the pcm
Leave battery CONNECTED, DO NOT DISCONNECT IT.
Buckle the driver seat belt so that it won't cause chimes that will be confusing.
Remove the PCM/SKIM fuse from the fuse box. Its marked on the bottom of the fuse box lid.
Insert key and turn all the way to START and hold it there until you hear 2 chimes. The truck will not turn over.
Remove key, unbuckle seatbelt, replace fuse, done.
The first time you go to start it, there may be a delay for cranking for a second or two. This is normal.
The following users liked this post:
Steven Winkler (09-04-2020)
Trending Topics
#8
#9