Voltage@knock sensor connector
#1
03-11-2017, 05:19 PM
Join Date: Mar 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Voltage at knock sensor
Hi,
Does somebody know what is the voltage that a PCM froma Dodge Caliber '07 sends to the knock sensor?
I mean, if I disconnect the knock sensor, what is the voltage that I should read on the two wires connector using a voltage meter?
I am getting a very high ignition timing advance and I suspect that voltage is not righ. My car has very poor power and poor gas milleage.
Does somebody know what is the voltage that I should read with a voltage meter at the knock sensor connector? I mean, knock sensor disconnected, what is the voltage that the PCM send?
Does somebody know what is the voltage that a PCM froma Dodge Caliber '07 sends to the knock sensor?
I mean, if I disconnect the knock sensor, what is the voltage that I should read on the two wires connector using a voltage meter?
I am getting a very high ignition timing advance and I suspect that voltage is not righ. My car has very poor power and poor gas milleage.
Does somebody know what is the voltage that I should read with a voltage meter at the knock sensor connector? I mean, knock sensor disconnected, what is the voltage that the PCM send?
Last edited by jkeaton; 03-12-2017 at 09:29 AM. Reason: Duplicate posts
#2
03-29-2017, 02:45 AM
Here is a link to the factory service manual that you can download for free. It should have all of the info that you need. https://dodgeforum.com/forum/dodge-c...ce-manual.html
