I think my rear wheel hub bearing went out. It is making howling noise.
Can some body tell me how I can replace it ?
I have 99 Carvan 3.8 Motor with ABS and wheels are 15' with Drum Brakes [&:]
Thanks

 

It is a very easy job. You need to remove the drum which may be stuck on the hub due to corrosion--bang it with a hammer a few times around the circumference and it will come off. Then you need to remove the speed senser from the backing plate--you do this from the back and it is held on with a single small bolt. Then you will see four nuts that hold on the hub--take them off and the hub will slide out. No brake parts need to be disturbed. It's a 20 minute job.