Hello,
I lost third gear on my '94 3.3l Dodge Grand Caravan. To diagnose it I would like to hook up an oil pressure gauge to the pressure taps on the front of the transmission. However, I do not know what type of fitting the taps require or where to buy such fittings. The ports are a lot smaller than any fitting included with the pressure gauges available at the local auto parts stores.
Can anyone tell me what type of fitting is required and where I can buy one?
Thank You
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Do you have 1st and 2nd gear and no 3rd gear? Because if the trans is shifting as i just stated, then you may have a broken hub/with shaft or burnt clutches. In which case I would recommend a tear down.
__________________
Master Chassis tech, Transmission
Automatic and Manual and Suspensions.
Also repair front and rear diffs and all engine
repairs inc Diesel. A/C repair too.
Yes, I still have first and second. I figure the transmission is probably going to have to come apart but I still would like to diagnose the problem the best I can before I take it out.
Anyone here know where the fittings can be obtained?
Send me an email address and I'll send the pictures of the pressure ports on a pdf file.
__________________
Master Chassis tech, Transmission
Automatic and Manual and Suspensions.
Also repair front and rear diffs and all engine
repairs inc Diesel. A/C repair too.
Transmission pressure tap fittings
