Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Dodge Ram 1500 Exterior Guides
- Dodge Ram 2009-Present: How to Stop Third Brake Light Leak
Step by step intructions for the do-it-yourself repairs.
Browse all: Dodge Ram 1500 Exterior Guides
LED High Mount Stop Light (CHMSL)
#1
LED High Mount Stop Light (CHMSL)
Hello all,
I just ran into my first problem with my new (to me) 2008 Dodge Grand Caravan SXT. The High Mount Stop Light, commonly known as the third brake light or CHMSL, is not working. The owners manual has the following to say:
----------------
LIGHT BULBS — Exterior Bulb Number
Center High-Mounted Stop Light . . . LED (See Note 1)
Note 1: The Center High-Mounted Stop Light (CHMSL)
uses LED lights that are not serviceable separately. The
CHMSL must be replaced as an assembly, see your
authorized Dealer.
----------------
So I have a few questions.
1. Has anyone changed this assembly on their own?
2. Could something else be causing this light to fail?
3. How can I get at the assembly to do some testing?
I only had a few minutes tonight to diagnose the problem, and I didn't see an easy way to get to the assembly. An initial search of the internet was unhelpful and nobody seems to carry this part. Any help or insight would be greatly appreciated.
Thanks!
Jason
I just ran into my first problem with my new (to me) 2008 Dodge Grand Caravan SXT. The High Mount Stop Light, commonly known as the third brake light or CHMSL, is not working. The owners manual has the following to say:
----------------
LIGHT BULBS — Exterior Bulb Number
Center High-Mounted Stop Light . . . LED (See Note 1)
Note 1: The Center High-Mounted Stop Light (CHMSL)
uses LED lights that are not serviceable separately. The
CHMSL must be replaced as an assembly, see your
authorized Dealer.
----------------
So I have a few questions.
1. Has anyone changed this assembly on their own?
2. Could something else be causing this light to fail?
3. How can I get at the assembly to do some testing?
I only had a few minutes tonight to diagnose the problem, and I didn't see an easy way to get to the assembly. An initial search of the internet was unhelpful and nobody seems to carry this part. Any help or insight would be greatly appreciated.
Thanks!
Jason
Last edited by jpx7777; 07-01-2011 at 12:08 AM. Reason: typo
#2
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Received 92 Likes
on
78 Posts
Welcome to DF
Here is some information right out of the dealers manual. Mounted Stop/Removal
REMOVAL
NOTE: The CHMSL illumination on this vehicle is accomplished by LED bulbs and these bulbs are not serviced separately. The CHMSL must be replaced as a unit.
1. Disconnect and isolate the battery negative cable.
2. Open the rear liftgate, and disconnect the washer hose from the CHMSL unit.
3. Remove the liftgate spoiler assembly.
4. Remove the two screws from the CHMSL unit and remove the unit from the liftgate spoiler assembly.
Here is some information right out of the dealers manual. Mounted Stop/Removal
REMOVAL
NOTE: The CHMSL illumination on this vehicle is accomplished by LED bulbs and these bulbs are not serviced separately. The CHMSL must be replaced as a unit.
1. Disconnect and isolate the battery negative cable.
2. Open the rear liftgate, and disconnect the washer hose from the CHMSL unit.
3. Remove the liftgate spoiler assembly.
4. Remove the two screws from the CHMSL unit and remove the unit from the liftgate spoiler assembly.
#3
#4
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Received 92 Likes
on
78 Posts
23 - Body / Exterior / SPOILER/Removal
REMOVAL
Labor Operations: Click to display a list of Labor Operations associated with this procedure
1. Open the rear liftgate.
2. Remove the two fasteners on each side of the liftgate.
3. Remove the upper trim panel on the rear lift gate.
NOTE: The two outboard clips are accessible through holes and can be compressed with a 8mm socket. The middle clip is blind and requires a 8mm box wrench. If the center clip is broken it is service part.
4. Remove the two fasteners and unclip the 3 pushpins for the rear spoiler.
5. Disconnect the electrical connector for the brake lamp.
6. Disconnect the washer hose from the spoiler.
7. Remove the spoiler from the vehicle.
REMOVAL
Labor Operations: Click to display a list of Labor Operations associated with this procedure
1. Open the rear liftgate.
2. Remove the two fasteners on each side of the liftgate.
3. Remove the upper trim panel on the rear lift gate.
NOTE: The two outboard clips are accessible through holes and can be compressed with a 8mm socket. The middle clip is blind and requires a 8mm box wrench. If the center clip is broken it is service part.
4. Remove the two fasteners and unclip the 3 pushpins for the rear spoiler.
5. Disconnect the electrical connector for the brake lamp.
6. Disconnect the washer hose from the spoiler.
7. Remove the spoiler from the vehicle.
#5
Interesting turn of events
So it looks like there might be a deeper issue here. Yesterday I was going to start tearing into the liftgate to test the light. My brother was over the house and I just wanted to double check that the light was still out. I jumped in the van and pressed the brake pedal and he reported zero brake light activity. I tried the emergency flashers and they worked. I started the engine and the two lower brake lights started working with the pedal, but still no 3rd brake light. Key off again, and back to no brake lights. This is quite odd. I've just started researching and I will check the fuses tonight. I wanted to know if anyone else has seen this problem.
Thanks!
J
Thanks!
J
#6
Update
I pulled fuse M1 from the TIPM when I got home after work today. It was blown. I replaced it with a matching 15 AMP fuse and third brake light is functional again, along with the new symptom of no brake lights with the Key Off.
It's funny because my normal thought process would have been check the bulb -> bulb ok? -> check the fuse. But with the LED module I got all sidetracked trying to take it out to test it. A reminder to myself to K.I.S.S.
Hopefully this will not reoccur.
Thanks for the help!
Jason
It's funny because my normal thought process would have been check the bulb -> bulb ok? -> check the fuse. But with the LED module I got all sidetracked trying to take it out to test it. A reminder to myself to K.I.S.S.
Hopefully this will not reoccur.
Thanks for the help!
Jason
#7
Trending Topics
#8
Well, I replaced the Brake switch over the weekend and installed a new fuse. The wife took the van on Tuesday and this morning it had blown the fuse again and had no CHMSL or brake lights when the key is off.
Does anyone have the wiring diagram for the brake lights? I had a copy but I lost it.
Does anyone have the wiring diagram for the brake lights? I had a copy but I lost it.
#9
#10
I'm really hesitant about putting a 20-amp fuse in there. From what I do remember from the wiring diagram is that this circuit flows through the BCM. It is very interesting that the fuse does not blow immediately, so it is probably not a dead short, but the fact that the side brake lights don't work until you turn on the key is perplexing.