ok it does have skim i called dealership they went off last 8 numbers of the vin

 

OK, you CAN get a used one if you want. They can program it to your van and when they do the procedure with the scan tool, it will write your VIN into the used one. Same goes for a rebuilt one at a parts store.

 

What numbers do i need to match looks like first sticker says 04748375ae and the one over it says 04727366ad and if i have guy come to me to do it can he turn off egr parameters if the one i get had a egr?

 

This one i found at junk yard i didn't get it tho because it was a different software update # and it was out of a 3.3 not a 3.8 and it had a egr valve. But i believe the module #"s from factory are the same not sure if it will work if reprogrammed

 

I can't tell you anything by part numbers. The "base" PCM number before software install can be different than what's on the label now. You will have to look at build options according to the VIN numbers.

 

man im to the point i might have a better chance finding a unicorn. majority of the ecm distributors with plug and play units have poor reviews unless i spend 450.00

 

i got a ecm today out of a 04 town and country 3.8 no egr part # and update# are the same. im a have the guy come program it to vin and mileage on thursday. ill post back after

 

Yeah, the internet operations are typically shady



Good luck.

 

brought it to dealership changed ecm in their parking lot they came out and flashed and programmed it 140.00. runs good again thanks for feed back tntech..

 

​​​​​​For future reference just so ur aware you can use hptuners on a pcm that has skim and turn it off to where u don't have to have a fob for you immobilizer. I'm not trying to be rude or anything. Ur facts were just in correct. Took me 3 months to figure this out. Seeing I'm used to Chevy and Ford. What your thinking is bypassing it. You cannot bypass skim only vats and pats.