It's under hood behindair intake. That part connected from air intake to exaust pipe, by pipe about 1/2 or 3/4 of inch, and on back side of it its a plug. on some models you can see from the top EGR unit, and it's cost 87 bucks. On 2000 caravans, EGr's just behind Air Mass flow unit, it's kinde of hurd to reach the plug but you can do that.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
It's under hood behind air intake. That part connected from air intake to exaust pipe, by pipe about 1/2 or 3/4 of inch, and on back side of it its a plug. on some models you can see from the top EGR unit, and it's cost 87 bucks. On 2000 caravans, EGr's just behind Air Mass flow unit, it's kinde of hurd to reach the plug but you can do that.
One in fuel tank, and there is no more filters, unless some one putt there by it self. And right behind battery, there is a gas canister filled with charcoal, that is final very thin filter, that it.
Please i need help.
My dodge grand caravan won´t start.
The engine turns around but it won´t start.
Anybody who can help me and tell me what can be wrong?
Thanks Gugge
:i con_laugh::ico n_laugh::icon_ laugh:
The engine turns around but it won´t start
Who are you M or W?
Hi I have a 2002 Grand caravan. The fuel tank colapses when I accelerate. The engine light is on. I switched a solonoid purge valve from a buddies van to test it and the problem went away. I bought a new purge valve and the problem returned. Help!!!
Did you check the plug to it, make shure is clean. Before i didn't pay much attention to plugs, but one day i admit plug to be wet, and my van went in LIMP mode. So i took air hose and blow all plugs i was working with. And poroblem gone for good. But even after you did change purge valve, and the CEL come's back either one is bad, purge valve you bought, or wet or dirty plugs, and plug shorting. Or new though bad gas, wich is with water or some small trash. So any way what the OBD Code? on this problem? Did you check with OBD-II reader? if yes what's the code?
hello my fellow dodge fans.does anyone out their know or have the DO IT YOURSELF steps to removal of and installing of a 2.4 engine for my 2001 dodge caravan.i have found a motor and would like to replace it myself.can anyone help me out with some info
hello my fellow dodge fans.does anyone out their know or have the DO IT YOURSELF steps to removal of and installing of a 2.4 engine for my 2001 dodge caravan.i have found a motor and would like to replace it myself.can anyone help me out with some info
Whell first you need engine lifter, and a car platform to lift a van. You won't be able to pull engine up throu hood area, engine has go down, and when engine is down on ground, then lift the front of the van so you can swap the engine, working same way up.
