Check engine light
#1
Check engine light
Hi all,
I've got a 2007 Dodge 3500 Mega cab dually with approximately 75,000 miles on it. It has the Cummins 6.7 L engine and is showing a check engine light (also referred to as a Malfunction Indicator Light). A friend of mine says it is probably nothing and I can unhook the battery cable for 20 minutes and the system will reset. I don't have a OBD II reader on the truck. If anyone who has had this problem or is aware of it, please let me know what you think. I don't want to do damage to my truck, but would love to fix it myself if possible. Thanks
I've got a 2007 Dodge 3500 Mega cab dually with approximately 75,000 miles on it. It has the Cummins 6.7 L engine and is showing a check engine light (also referred to as a Malfunction Indicator Light). A friend of mine says it is probably nothing and I can unhook the battery cable for 20 minutes and the system will reset. I don't have a OBD II reader on the truck. If anyone who has had this problem or is aware of it, please let me know what you think. I don't want to do damage to my truck, but would love to fix it myself if possible. Thanks
#2
Unfortunately a MIL can indicate everything from emissions being non-compliant to the end of the world being near. You really should have your OBDII read. There are 'how-to's' on the forum that will allow you to extract the codes from your odometer display. I personally cannot remember the steps. I know as an owner of one of these machines that the stress of having a MIL on does not help when trying to ensure your going to fit between the two honda civics at the next light.
#3
#4
Unfortunately a MIL can indicate everything from emissions being non-compliant to the end of the world being near. You really should have your OBDII read. There are 'how-to's' on the forum that will allow you to extract the codes from your odometer display. I personally cannot remember the steps. I know as an owner of one of these machines that the stress of having a MIL on does not help when trying to ensure your going to fit between the two honda civics at the next light.
Anyway, I decided to take the truck in to the dealer where I bought it and fork out the big bucks. I don't know a good diesel mechanic and will have to start looking for one in this area. I'll let you know what I find out.
#5
Thanks 98Dakota. I think I'll take her over to the Dodge Dealership for now. I realize that the OBD II readers are cheap, but after you get a code, you have to figure out exactly what sensor or other item is involved. From what I understand the code gives you an idea of what is wrong. It could be several different things. Correct me if I'm wrong, but that is what I have been told and read. I think since I just got the truck and have never had a diesel truck before, I will pay this time and then start to save for a Banks or Bullydog system.
#7
Well, I took the truck to the local Dodge dealer and they found that the O2 module and both 02 sensors were out. They replaced all these items under warranty since they are part of the emissions system. The first question they asked me was the truck ever altered such as a chip. Keep that in mind since the warranty on emissions is a lot longer than the 3 year/36,000 mile standard warranty. Anyway, I walked out of there owing $000. I couldn't believe it. Until I have the truck longer than the emissions warranty, I'm not touching a thing.
Trending Topics
#8
#9
After that experience, I don't think I'll chip the motor. I pull a 23' Weekend Warrior and don't really need to. I bought this for the four wheel drive and dual wheels for stability due to the high winds in the passes we go through. It was blowing my 1500 around quite a bit. And the idea of getting stuck in the sand sucks, if you know what I mean.