Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

6.7 EGR Problems

  #1  
Old 01-24-2013, 08:15 AM
fatboyt07's Avatar
fatboyt07
fatboyt07 is offline
Registered User
Thread Starter
Join Date: Jan 2013
Location: Plaquemine Louisiana
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default 6.7 EGR Problems

Took my truck to the shop because it started running bad and died it wouldn't restart. well shop scanned it and got trouble codes for EGR excessive Flow and EGR stuck open. sound that if the EGR valve is removed from the intake the truck will crank and run just fine. so they cleaned all EGR components with the dodge EGR cleaning solution and still wouldn't run if egr was installed so changed the egr valve with one off of another truck ( a known good one) still does the same thing. guy at shop is now bumfuggled and stumped a lil help please. I need my truck.
 
  #2  
Old 01-28-2013, 07:47 PM
go-part's Avatar
go-part
go-part is offline
Former Vendor
Join Date: Nov 2012
Posts: 309
Likes: 0
Received 0 Likes on 0 Posts
Default

Check the ECM because that is what controls how far the EGR valve is allowed to open up. The flow is based on engine load and engine speed, the ECM gets that feedback from the sensors.
 
  #3  
Old 01-29-2013, 08:32 AM
fatboyt07's Avatar
fatboyt07
fatboyt07 is offline
Registered User
Thread Starter
Join Date: Jan 2013
Location: Plaquemine Louisiana
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Got it fixed problem was turbo was so stopped up that the only way the engine was running was exhausting through the little one inch pipe that runs from the exhaust to the egr valve. They showed me the old turbo full of carbon and clogged up. Never would have guessed it cause truck ran fine one minute killed it to fuel up and it got hard to start and wouldn't run.
 
  #4  
Old 01-29-2013, 11:21 AM
Jigabop's Avatar
Jigabop
Jigabop is offline
Champion
Join Date: May 2012
Location: Renton, WA
Posts: 3,065
Likes: 0
Received 1 Like on 1 Post
Default

and people still want to argue that the 6.7L's are great trucks....

problems like this are completely unheard of on the 5.9L's of any generation.

anyway...A tip for you fatboy since you are stuck with a 6.7L

stop babying the truck. the easier you drive it, the more problems you are going to have.

if you want to prevent soot buildup you need to run it hard. drive it like you stole it and get that exhaust HOT. get an EGT gauge and load up and pull a long grade and try to hold 1200* on the pyro for as long as you can. that will literally start burning off all of the soot buildup in your exhaust.
 
  #5  
Old 01-29-2013, 11:58 AM
scatpack_69's Avatar
scatpack_69
scatpack_69 is offline
All Star
Join Date: Jul 2007
Location: Wyoming
Posts: 759
Likes: 0
Received 0 Likes on 0 Posts
Default

Turn the exhaust brake on whenever you drive it
 
  #6  
Old 01-29-2013, 11:39 PM
horatio102's Avatar
horatio102
horatio102 is offline
Champion
Join Date: Feb 2005
Location: Skagit County, WA
Posts: 3,710
Likes: 0
Received 1 Like on 1 Post
Default

The 6.7 is a great motor, but the emissions crap kills them.

Like scatpack said, use the exhaust brake 24/7, except if you're concerned with losing control (ice, etc)

And like Jigabop said, run the snot out of it every now and then.
 
  #7  
Old 01-30-2013, 08:50 PM
hillbilli's Avatar
hillbilli
hillbilli is offline
Veteran
Join Date: Jun 2011
Location: ND
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Default

drive it like you stole it, always use the exhaust brake to keep the vains moving, and look into a egr delete or just unplug it if you dont mind the check engine light.
 


Thread Tools
Search this Thread
Quick Reply: 6.7 EGR Problems



All times are GMT -4. The time now is 03:08 PM.