Drew: How about a DIY on the rear Diff?? - Page 3

timesublime · #21 09-20-2007, 06:50 PM

Quote:

ORIGINAL: deanj287

hmmm i think i just might keep em in then!

[IMG]local://upfiles/26067/1B7205A0D33C4E22BAC3CAC2502EFEBD.jpg[/IMG]

This ad is not displayed to registered and logged-in members.
Register your free account today and become a member on Dodge Forums!

lanesharon · #22 05-31-2009, 05:27 PM

I have the red, Permatex Hi-Temp RTV silicone. Says it is okay for oil pans, so will that do the trick here? Also, I have been told that there is a magnet inside the housing that needs to be cleaned. True? False? That is why I am pulling the cover off. Want to make sure there is no metal shavings in there.

Any tricks on refilling would be greatly appreciated.

steve05ram360 · #23 06-02-2009, 08:34 PM

Yes on the magnet, no need for the permatex as the gasket is re-useable on the 3rd gen's, not sure about the 2nd gens.

when refilling, I made myself a funnel extension and poured through the wheel well.