Dodge Journey Dodge Journey forum for discussion on the popular Dodge Crossover and CUV.

Rear wiper motor

  #1  
Old 03-15-2014, 07:31 PM
jayman920's Avatar
jayman920
jayman920 is offline
Registered User
Thread Starter
Join Date: Feb 2014
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Rear wiper motor

I'm trying to replace my rear wiper motor, can anyone help me how to remove the back cover and access the motor.

I appreciate any help getting tired of pulling into the gas station to clean the window lol
 
  #2  
Old 03-15-2014, 08:49 PM
bigtsr's Avatar
bigtsr
bigtsr is offline
Captain
Join Date: Jun 2006
Location: Burlington.Ontario.Can
Posts: 518
Likes: 0
Received 0 Likes on 0 Posts
Default

Have you tried to reset the TIPM yet?
There are several screws inside the hatch to remove
then with a little muscle to release it from the pop
clips around the cover perimeter it will come off.
 
  #3  
Old 03-16-2014, 07:39 AM
jayman920's Avatar
jayman920
jayman920 is offline
Registered User
Thread Starter
Join Date: Feb 2014
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bigtsr
Have you tried to reset the TIPM yet?
There are several screws inside the hatch to remove
then with a little muscle to release it from the pop
clips around the cover perimeter it will come off.
Thanks for the reply, what and how do i reset the TIPM?

Thanks Jay
 
  #4  
Old 03-16-2014, 09:37 PM
bigtsr's Avatar
bigtsr
bigtsr is offline
Captain
Join Date: Jun 2006
Location: Burlington.Ontario.Can
Posts: 518
Likes: 0
Received 0 Likes on 0 Posts
Default

TIPM reset is done by disconnecting Negative battery
cable for 10-15 minutes then re-installing , reboots
electrical bus system.
 
  #5  
Old 04-10-2014, 12:32 AM
Ppcdc30's Avatar
Ppcdc30
Ppcdc30 is offline
Registered User
Join Date: Apr 2014
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I have a 2009 Dodge Journey SXT AWD and I have started to have a problem with the rear wiper. When. It operates on the intermittent setting it just continues to run without pausing and when you turn it off it stops where it is on the window without going back to the home/stored position. The washer fluid function works fine also. I have tried disconnecting the battery to resolve it and did not help. When you turn the switch on the column on you can hear a relay switch on under the hood in the fuse box. I cannot locate which relay it is because they did not mark them for some reason.

Has anyone had this problem before or able to help me in directing me in a direction to fix or possibility of which relay that controls this so I can isolate it without taking it to a dealer to put it on a computer to see what the issue is.
 
  #6  
Old 03-25-2020, 04:13 PM
icejester's Avatar
icejester
icejester is offline
Registered User
Join Date: Mar 2020
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default broken wires

i removed the wire boot at the top left of the hatch door..5 wires were broken in half from wear and tear over time..spliced them back together..all works again
 
  #7  
Old 07-21-2020, 09:15 AM
Hatem Megaly's Avatar
Hatem Megaly
Hatem Megaly is offline
Registered User
Join Date: Nov 2017
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Anyone have the pin assignment fir the rear motor connector please?
 


Thread Tools
Search this Thread
Quick Reply: Rear wiper motor



All times are GMT -4. The time now is 06:42 PM.