Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

DTC P0123 Throttle/Pedal Position Sensor A Circuit High Input

Thread Tools
 
Search this Thread
 
  #1  
Old 05-05-2007, 04:01 PM
st1100man's Avatar
st1100man
st1100man is offline
Thread Starter
Join Date: May 2007
Location:
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default DTC P0123 Throttle/Pedal Position Sensor A Circuit High Input

Can anyone explain what might be the cause DTC P0123 (Throttle/Pedal Position Sensor A Circuit High Input. Is it the TPS or whatever supplies the voltage to the TPS, or something else? The check engine light stays on, and I believe I felt a couple of slight misfires, 1-2 miles from the house. [&:]
This is what the code reader gave me.

Report Date: 5-4-2007 (3:54 PM)
Vehicle Year: 2000
Vehicle Make: Dodge
Vehicle Model: Ram 2500
Vehicle Engine Size: 5.9L Diesel
Vehicle Mileage: 84,100

Stored:
P0123 Throttle/Pedal Position Sensor A Circuit High Input

MIL ON
MisFire Monitor Complete
Fuel System Monitor Complete
Comprehensive Component Monitor Complete
Catalyst Monitor Not Supported
Heated Catalyst Monitor Not Supported
Evaporative System Monitor Not Supported
Secondary Air System Monitor Not Supported
A/C System Refrigerant Monitor Not Supported
Oxygen Sensor Monitor Not Supported
Oxygen Sensor Heater Monitor Not Supported
EGR System Monitor Not Supported

DTC for which Freeze Frame was Stored P0123
Calculated LOAD Value 7.45 %
Engine Coolant Temp 170.60 °F
Intake Manifold Absolute Pressure 30.12 inHg
Engine RPM 768 rpm
Vehicle Speed Sensor 0.00 mph
Intake Air Temperature 152.60 °F
Absolute Throttle Position 0.00 %


Thanks, Steve
 
  #2  
Old 05-06-2007, 08:15 PM
Drew's Avatar
Drew
Drew is offline
Professional
Join Date: Aug 2004
Location: 33.43.342, 84.21.602
Posts: 117
Likes: 0
Received 1 Like on 1 Post
Default RE: DTC P0123 Throttle/Pedal Position Sensor A Circuit High Input

your TPS could be going out. . .if you can clear the code see if it will come back.
 
  #3  
Old 07-06-2007, 09:06 PM
st1100man's Avatar
st1100man
st1100man is offline
Thread Starter
Join Date: May 2007
Location:
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default RE: DTC P0123 Throttle/Pedal Position Sensor A Circuit High Input

I cleaned the TPS plug in contacts, and worked the throttle fully numerous times with the engine off. I was then able to reset the truck computer, the check engine light went out, and my OBD2 reader went from red l.e.d. to yellow
 



Quick Reply: DTC P0123 Throttle/Pedal Position Sensor A Circuit High Input



All times are GMT -4. The time now is 12:28 PM.