Does a 3rd gen 5.9 cummins idle up automatically?
#11
#12
#13
RE: Does a 3rd gen 5.9 cummins idle up automatically?
What year did they start putting the high idle function in? I have a 2004.5 and would like to get the high idle function enabled if it is available. How does it work? Mine idles up a few minute after I start it then idle down, but I would love to be able to bump it up sooner!
#15
#16
RE: Does a 3rd gen 5.9 cummins idle up automatically?
have ya ever listen to a ferd rattle when its cold? They sound like they're about to fall apart!! They have the most disconcerting rattling and knocking I've ever heard... I tend to keep my distance from em, for fear something may come flying out from under the hood and hit me!
#17
#18
#19
RE: Does a 3rd gen 5.9 cummins idle up automatically?
ORIGINAL: 1Normy
Drew
is this something I can hook up myself? If so do you have a Diagram of where on the ECM to hook to and I am asuming that it just hooks to the frame.
Drew
is this something I can hook up myself? If so do you have a Diagram of where on the ECM to hook to and I am asuming that it just hooks to the frame.
sorry for not getting back with you earlier but there is apigtail with a part number you can order directly from cummins. . .I dont have it off hand, but you tap that wire onto pin 22 on ECM plug B, then just ground that wire to the frame. go to the dealer and have them enable the high idle function. after they have it enabled you turn the cruise control on, then push set and the engine will automaticaly idle up to 1100rpm. then you can use the accel and decel buttons to raise and lower the rpm's by 100rpm's to a max of 1500rpm.
#20