4x4 conversion
#1
#2
Its a piece of cake. If you can change your own wiper blades then you are ready for this conversion. All you need is a screw driver or a butter knife and a pair of pliers and you can have it done in your drive way in a weekend. I sell a conversion kit it costs around 10K all you have to do is use your screw driver to change the license plates.
#3
Its a piece of cake. If you can change your own wiper blades then you are ready for this conversion. All you need is a screw driver or a butter knife and a pair of pliers and you can have it done in your drive way in a weekend. I sell a conversion kit it costs around 10K all you have to do is use your screw driver to change the license plates.
#4
It does not work that way. The cheepest way Seriously would be to find a wrecked 4x4 and put your body onto it.
This here would be the cheapest way for you.
http://cgi.ebay.com/ebaymotors/Dodge...fCarsQ5fTrucks
This here would be the cheapest way for you.
http://cgi.ebay.com/ebaymotors/Dodge...fCarsQ5fTrucks
#6
I would look at a junk yard for one that does not have front end damage. Buy the whole front clip- have them cut the fram right behind the control arms. This will give you everything you would need plus you could take all the measurements before you tear it apart. I would bet a few grand would be involved just because axles are not cheap.