freeze out plug locations and sizes?
#1
freeze out plug locations and sizes?
Hi Guys,
my least fav automotive subject. 4 hours of work for a $0.39 part. So if I am going to have to do one of them, I'll do them all.
Does anyone have a link to the freezeout plug location and sizes on a 1992 Ram Van B350 - 318in engine?
I know there are two located at the rear of the engine (have to remove tranny to get to them) but I don't know what size they should be.
I've also noticed 2 on the lower drivers side of the block and 2 on the lower pass side of the block. No idea what sizes they are supposed to be.
Have I missed anything? Are there just 6 total ?
Thanks a lot
my least fav automotive subject. 4 hours of work for a $0.39 part. So if I am going to have to do one of them, I'll do them all.
Does anyone have a link to the freezeout plug location and sizes on a 1992 Ram Van B350 - 318in engine?
I know there are two located at the rear of the engine (have to remove tranny to get to them) but I don't know what size they should be.
I've also noticed 2 on the lower drivers side of the block and 2 on the lower pass side of the block. No idea what sizes they are supposed to be.
Have I missed anything? Are there just 6 total ?
Thanks a lot
#2
There's more than twice that when you include the ones in the heads and the front of the engine. Your best bet is to just buy a freeze plug kit so that you'll have them all.
http://www.rockauto.com/catalog/rafr...&parttype=5332
http://www.rockauto.com/catalog/rafr...&parttype=5332
Last edited by alloro; 10-13-2011 at 09:28 PM.