Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Exhaust and Intake System
- Dodge Dodge Ram 2nd Gen How to Replace Idle Air Control (IAC) Valve
Step by step instructions for the do-it-yourself repairs.
Browse all: Exhaust and Intake System
DIY How to clean the IAC
#1
DIY How to clean the IAC
*** NOTE: I made this posting to load with pictures for56k dial-up friendly speed.
Does your 3.9L, 5.2L or 5.9L Magnum engine rev up and down during idle (surges) while in park or netural? If so, the problem is a dirty IAC. Here's the process to clean this IAC to keep your engine happy with a nice idle rpm and avoids wasting fuel too.
This DIY maintenance works with 3.9L/239cid, 5.2L/318cidand 5.9L/360cid Mangnum engines found in many of the Dodge Trucks, Full size Vans/Wagons, SUV's and a few Jeeps.
A sample look of a 3.9L, 5.2L or 5.9L magnum engine with the van's dog-house removed.
Here's the jewel of the IAC. Notice the driver on the left mounting screw.
Just remove the connector out of the way.
Rats. [:@] The fuel bridge is in the way to get the second screw off.
OK, I'll use a longer driver socket and a pair of pliers to get the screw loose.
Now, with the flex drive over the bridge, the screw turns quickly. You may use what ever tools you have to get at that screw too.
*** NOTE ***
NEVER move the IAC brass probe more than 1/4" in travel while cleaning or handling. !!?!! Right now the picture shows it all black.
Ah, here's what the IAC looks like. OK, think clean thoughts here.
Up close all dirty ...
My cleaning bench.
A cotton swab and clean rag.
The IAC cleaned up really good.
Ah, but wait, there is more!!! The TB port is dirty too!
One clean IAC port. That's how it's too look. OK, clean thoughts here too.
DO NOTE: Inside of this IAC port hole is an air intake slot. It's very hard to see on the inside on the bottom. This needs to be cleaned very carefully. Avoid breaking the swab head off wiping the crusty bottom slot out. As you look at the picture below, the slot is on the bottom between the entrance hole and the round port in the back.
Alright, just put the IAC back into the hole, drive the screws and plug in the connector!
Hope this helps too!
Does your 3.9L, 5.2L or 5.9L Magnum engine rev up and down during idle (surges) while in park or netural? If so, the problem is a dirty IAC. Here's the process to clean this IAC to keep your engine happy with a nice idle rpm and avoids wasting fuel too.
This DIY maintenance works with 3.9L/239cid, 5.2L/318cidand 5.9L/360cid Mangnum engines found in many of the Dodge Trucks, Full size Vans/Wagons, SUV's and a few Jeeps.
A sample look of a 3.9L, 5.2L or 5.9L magnum engine with the van's dog-house removed.
Here's the jewel of the IAC. Notice the driver on the left mounting screw.
Just remove the connector out of the way.
Rats. [:@] The fuel bridge is in the way to get the second screw off.
OK, I'll use a longer driver socket and a pair of pliers to get the screw loose.
Now, with the flex drive over the bridge, the screw turns quickly. You may use what ever tools you have to get at that screw too.
*** NOTE ***
NEVER move the IAC brass probe more than 1/4" in travel while cleaning or handling. !!?!! Right now the picture shows it all black.
Ah, here's what the IAC looks like. OK, think clean thoughts here.
Up close all dirty ...
My cleaning bench.
A cotton swab and clean rag.
The IAC cleaned up really good.
Ah, but wait, there is more!!! The TB port is dirty too!
One clean IAC port. That's how it's too look. OK, clean thoughts here too.
DO NOTE: Inside of this IAC port hole is an air intake slot. It's very hard to see on the inside on the bottom. This needs to be cleaned very carefully. Avoid breaking the swab head off wiping the crusty bottom slot out. As you look at the picture below, the slot is on the bottom between the entrance hole and the round port in the back.
Alright, just put the IAC back into the hole, drive the screws and plug in the connector!
Hope this helps too!
#3
RE: How to clean the IAC
Lee,
On the Gen-2 Ram Vans, this cleaning fixes most of the engine surging and the feeling like the tranny is slipping out of grear while driving down the road. Also, keeping the IAC clean really helps the fuel economy with these vans since the idle speed doesn't rev up and down constantly.
Stev
On the Gen-2 Ram Vans, this cleaning fixes most of the engine surging and the feeling like the tranny is slipping out of grear while driving down the road. Also, keeping the IAC clean really helps the fuel economy with these vans since the idle speed doesn't rev up and down constantly.
Stev
#5
#7
RE: How to clean the IAC
ORIGINAL: Solrac
i have a Rochester Quadrajet > where is this IAC located ??
my haynes/chilton don't show me much and mine doesn't look like yours ..
thank you ...
i have a Rochester Quadrajet > where is this IAC located ??
my haynes/chilton don't show me much and mine doesn't look like yours ..
thank you ...
Trending Topics
#10